RTQC-3.2×1250 Fly Cutting CTL
This Rotary Flying Shear Cut to Length equipment is used for processing the cold rolled steel coils for decoiling, leveling, measuring & cutting, then, stacking the steel sheets, packing & stowing.FeaturesDecoiler: Shrink and expend depended on the hydraulic tank, use the hydraulic motor to make the decoiler workLeveler: Adopt different ways of roll; the clearance can adjust both outer and inner. There is angle become bigger from the inner to the outer, it can level irregular radian better.Loop Bridge: It is used for better working for side guide device and also removes the running speed difference. Shear: The cutting is finished by the rotary flying shear. Adopt the pneumatic system, high-speed cut, clearance adjustableStacker: It works with 2 sets of stackers with continuous working & convenient changing.Process FlowWhen start the work of cut-to-length line, the roll sheet will be placed on the coil unloading car and transfer it to the decoiler, before that it must confirm the roll and the decoiler have same direction. The coil unloading car is fixed on the foundation between the storage table and the decoiler, transfer the coil to the right position and height, and make sure the coil inner fix to the decoiler in the middle position, then the coil unloading car and return. after the decoiler expansion created .turn on the outside decoiler and expend inner side, use the upper roll to fix the sheet head, then cut the packed belt, lift the feeding device peeler to support the sheet head, jog the decoiler and release roll, shrink the peeler leading the sheet in to the pinch roll and down the pinch roll. Make the sheet go in the leveler, the sheets after leveling will be measured & then be cut by the rotary flying shear synchronized. The finished products will be conveyed into the stacker. According to the request for stacking, they can be stacked by 1# or 2# stacker in order. At the end, the sheets can be taken out for packing or transferring.□The Max. Speed for the whole line is about 70m/min.□The cutting is finished by the rotary flying shear.□It works with 2 sets of stackers with continuous working & convenient changing.Technical ParameterModelProcessing materialCold-rolled steel coil, Galvanized coil, Color-coated coil, Stainless steel coil, etc.Processing sheet thickness0.3mm-2.3mm0.5mm-3.0mm0.5mm-3.0mmProcessing sheet width1250mm (MAX)1600mm (MAX)1850mm (MAX)Coil weight permitted15ton (MAX)20ton (MAX)20ton (MAX)Cutting accuracyCutting ±0.3mm; Acc/decelerate ±0.5mmLine speed90m/min-120m/minPhotos for ReferenceLoading Platform6-HI levelerHydraulic DecoilerPinch Roll + Pre-levelerSecond LevelerLoop BridgePrecision LevelerFlying ShearConveyorStacker
Other supplier products
|
|
RTHC- 20×2500 Decoiling Cutting Line |
Cut to Length Line (decoiling, leveling & shearing) is used for shearing the HR steel coils into plate with desired length.FeaturesRTHC series Deco... |
|
|
RTHC- 16×1800 Cut To Length Machinery |
This line is professional equipment is used for processing the hot rolled steel coil into the desired length steel plate ( thickness: from 4mm to 2... |
|
|
RTQC-3.2×1250 Fly Cutting CTL |
This Rotary Flying Shear Cut to Length equipment is used for processing the cold rolled steel coils for decoiling, leveling, measuring & cutting, t... |
|
|
RT44Q-1.5×1250 Simple Slitting Machinery |
The Simple Steel Coil Slitter Line composed of uncoiler, feeder, slitter and recoiler, is to slit a wide coil to stated width strips.FeaturesRT44Q ... |
|
|
RTHS-12×2000 HR Steel Slitting Machine |
This Sheet Metal Processing Coil Slitting Line is used for processing the hot rolled steel coils less than 20mm thickness through decoiling and sli... |
All supplier products
Same products
