Smoke Density Tester
Smoke Density Tester:
Smoke Density Tester, developed by Rohm and Has Company in the United States, was originally developed in the 197Os based on the ASTM D2843 standard. Its theoretical basis is Billung's law, which involves direct flame impingement on the sample.
The tester measures the optical density of the smoke generated during combustion and determines the Smoke Density Rating (SDR). Currently.
it is widely used in accordance with international standards for the smoke density testing of PvC conduits and automotive interior materials.
Features:
Durable Teflon-Coated Chamber:
The test chamber is lined with Teflon, providing strong resistance to the corrosive effects of combustion-generated smoke, which significantly extends the lifespan of the equipment.
Clear Visibility Markers:
The bottom of the chamber features an "EXIT" sign in white letters on a red background. This allows test personnel to easily observe the clarity or blurriness of the sample through the transparent observation window.
Precision Light Sensing:
The tester uses an incandescent light source paired with a silicon photodiode as the light sensor, calibrated with cosine corection. Equipped with color filters, it effectively blocks UV and IR light that is not visible to the human eye, ensuring accurate color matching.
High-Pressure Flame Impact:
The main burner applies a flame to the test sample at a pressure of 276 KPA. An auxiliary burner is also included to subject any dripping material to additional flame impact, operating at a gas pressure of 138 KPA to ensure thorough combustion of molten droplets.
Advanced Data Display:
The standard test software provides light transmittance values every 15 seconds, generating a transmittance test curve. After the test, it calculates and displays the SDR (Smoke Density Rating) value, which represents the integral value of the smoke produced.
Comprehensive Test Reporting:
The software can compile and synthesize test reports from three sample groups, creating an SDR smoke density development curve. It also allows simultaneous comparison of SDR values from three tests, automatically determining compliance with testing standards.
User-Friendly Data Management:
Test data can be easily exported to a computer and connected to a printer for convenient report generation and printing, enhancing user accessibility and efficiency.
Standards Compliant
ASTM E662
ASTM F814
NFPA 258
Boeing BSS 7238
FAR Part 25 Appendix F Part V
Aircraft Materials Fire Test Handbook Chapter 6
Airbus AITM 2.0007A
Airbus AITM 2.0007B
IMO MSC.61 (67) Annex 1 Parts 1&2
ISO 5659-2
IMO FTCP Part 2
BS 6401
ABD0031
The Main Purpose:
Mainly used for building materials and their products when the static smoke generated by the determination of smoke, is the test of textile materials, solid material burning smoke production of special equipment.
The Main Parameters:
1. gas source: 95% propane gas, or the same purity of the gas (customer-owned);
2. burning lights: for the students light, length 260mm, nozzle diameter 0.13mm, 45 ° angle with the smoke box;
3. photoelectric system: light source for the lamp, power 15W, operating voltage 6V;
4. smoke density measurement range: 0 ~ 100%;
5. smoke density measurement accuracy: ± 3%;
6. the receiver: for the silicon photovoltaic cells, light transmission rate of 0% without light through, light transmission rate of 100% light without cover completely through;
7. after processing the focal length: 60 ~ 65mm;
8. the main burner working pressure: 276KPa (adjustable);
9. auxiliary burner pressure: 138KPa (adjustable).
Send product request
Other supplier products
 |
Glow wire tester | F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh... |
 |
Cleanliness tester | Product Introduction: Cleanliness tester is mainly used for cleanliness detection and analysis of auto parts and new energy power battery parts, w... |
 |
Thermal and Water-vapour Resistance Tester | IntroductionTheThermal and Water-vapour Resistance Testeris a special measurement device used for measurement of thermal and water-vapour resistanc... |
 |
Textile water evaporation rate tester | Standard: The design and operation of this tester are aligned with key international and national standards related to assessing the moisture mana... |
 |
Automotive Wires Low - temperature Winding Tester | The low - temperature winding tester for automotive wires is used to assess and determine the performance of circular wire cables or circular ins... |
Same products
 |
Laser Cutting Machines | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
