Smoke Density Tester

Smoke Density Tester:

Smoke Density Tester, developed by Rohm and Has Company in the United States, was originally developed in the 197Os based on the ASTM D2843 standard. Its theoretical basis is Billung's law, which involves direct flame impingement on the sample.

The tester measures the optical density of the smoke generated during combustion and determines the Smoke Density Rating (SDR). Currently.

it is widely used in accordance with international standards for the smoke density testing of PvC conduits and automotive interior materials.

Features:

Durable Teflon-Coated Chamber:

The test chamber is lined with Teflon, providing strong resistance to the corrosive effects of combustion-generated smoke, which significantly extends the lifespan of the equipment.

Clear Visibility Markers:

The bottom of the chamber features an "EXIT" sign in white letters on a red background. This allows test personnel to easily observe the clarity or blurriness of the sample through the transparent observation window.

Precision Light Sensing:

The tester uses an incandescent light source paired with a silicon photodiode as the light sensor, calibrated with cosine corection. Equipped with color filters, it effectively blocks UV and IR light that is not visible to the human eye, ensuring accurate color matching.

High-Pressure Flame Impact:

The main burner applies a flame to the test sample at a pressure of 276 KPA. An auxiliary burner is also included to subject any dripping material to additional flame impact, operating at a gas pressure of 138 KPA to ensure thorough combustion of molten droplets.

Advanced Data Display:

The standard test software provides light transmittance values every 15 seconds, generating a transmittance test curve. After the test, it calculates and displays the SDR (Smoke Density Rating) value, which represents the integral value of the smoke produced.

Comprehensive Test Reporting:

The software can compile and synthesize test reports from three sample groups, creating an SDR smoke density development curve. It also allows simultaneous comparison of SDR values from three tests, automatically determining compliance with testing standards.

User-Friendly Data Management:

Test data can be easily exported to a computer and connected to a printer for convenient report generation and printing, enhancing user accessibility and efficiency.

Standards Compliant

ASTM E662

ASTM F814

NFPA 258

Boeing BSS 7238

FAR Part 25 Appendix F Part V

Aircraft Materials Fire Test Handbook Chapter 6

Airbus AITM 2.0007A

Airbus AITM 2.0007B

IMO MSC.61 (67) Annex 1 Parts 1&2

ISO 5659-2

IMO FTCP Part 2

BS 6401

ABD0031

The Main Purpose:

Mainly used for building materials and their products when the static smoke generated by the determination of smoke, is the test of textile materials, solid material burning smoke production of special equipment.

The Main Parameters:

1. gas source: 95% propane gas, or the same purity of the gas (customer-owned);

2. burning lights: for the students light, length 260mm, nozzle diameter 0.13mm, 45 ° angle with the smoke box;

3. photoelectric system: light source for the lamp, power 15W, operating voltage 6V;

4. smoke density measurement range: 0 ~ 100%;

5. smoke density measurement accuracy: ± 3%;

6. the receiver: for the silicon photovoltaic cells, light transmission rate of 0% without light through, light transmission rate of 100% light without cover completely through;

7. after processing the focal length: 60 ~ 65mm;

8. the main burner working pressure: 276KPa (adjustable);

9. auxiliary burner pressure: 138KPa (adjustable).

Другие товары поставщика

	Multi-Functional Scratch Tester	Introduction Multi-Functional Scratch Testeris suitable for a variety of automotive interior materials, such as plastic, rubber, leather, fabric, ...
	Impact strength tester for car seat launching headrest-QINSUN	Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, which is a key parameter to simulate vehicle coll...
	Polarimeter	Product advantages: 1. Better temperature control design, fast and accurate results Temperature is the external factor that has the greatest influ...
	Manual Crockmeter for Color Fastness Tester-QINSUN	Standard AATCC 8(Colorfastness to Crocking) ISO 105-X12(Textiles - Tests for Colour Fastness - Part X12: Colour Fastness to Rubbing) ASTM D505...
	Electronic geosynthetics comprehensive strength machine	Meet the standard GB/T16491-2022.GB/T15788-2017.GB/ T13763-2010. ASTM D4632M-a15.GB/ T2191. FZ/T01010. CJ/T452-2014. GB18173.1-2012 and JC/T2112....

Все товары поставщика

Похожие товары

	Air Intake Filter Test System	Продавец: Standard Groups	The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
	Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging	Продавец: Standard International Group (HK) Limited	The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
	Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester	Продавец: Standard International Group (HK) Limited	The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
	HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine	Продавец: Standard International Group (HK) Limited	The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
	VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine	Продавец: Standard International Group (HK) Limited	The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...