Melt wire drawing apparatus
Product Introduction:
Melt wire drawing instrument is specially designed for the production of rubber and plastic raw material filamentary sample, the instrument through melting, extrusion and wire drawing the powder or granular raw material into a minimum diameter of 10μm filamentary sample for the relevant test use.
Standards:
GB/T2918-2018. ISO 291:2008.MOD, GB/T 3682.1-2018. IS0 1133-1:2011.MOD, GB/T 3682.2-2018. IS0 1133-2:2011.MOD
Product features:
1. Set the melting temperature according to the requirements of raw materials, and the melting unit can melt the raw materials in the barrel.
2. According to the requirements of raw material characteristics and drawing diameter, the extrusion unit will extrude the melted raw material in the barrel by the mouth die at the set speed.
3. According to the requirements of raw material characteristics and drawing diameter, the drawing unit stretches the molten raw material extruded by the die to the designed diameter at the set speed, and winds it at the same time.
Performance parameters:
- Temperature range: room temperature ——400℃
- Die: Φ0.5mm, Φ0.3mm
- Discharge speed: 0——0.2mm/sv
- Winding speed: 0——20000mm/s
- Maximum diameter: Φ60mm
- Maximum pressure: 500N
- Minimum drawing diameter: 10μm
- Dimensions: 500mm*300mm*800mm
Send product request
Other supplier products
 |
Nail Hammer Snag Tester-QINSUN | The nail hammer snag tester is mainly used to evaluate the ability of fabrics to resist snag. Structure and principle Structure: It is generally... |
 |
Automotive Wires Flammability Tester | Compliance Standards FMVSS 302 (Federal Motor Vehicle Safety Standard) ISO 6722 (Road Vehicle Cable Flammability) UL 94 (Tests for Flammability ... |
 |
SO2 H2S HCL Corrosion Test Equipment-QINSUN | Meeting Standards: Carry out various sulfur dioxide gas corrosion tests in accordance with GB10587 - 89. GB2423.9 - 93. GJB150. QC/T417.1 - 2001 a... |
 |
Automobile wire corrugated pipe drag grinding machine | Standards: ISO 6722. QC/T730. JIS C 3046. JASO D 611. SAEJ1128-2005. JBT 8139.TBT 1484.1-2001 Part1. EN50305. EN50306and other standards Parame... |
 |
High - voltage DC Stability Tester | The high - voltage DC stability tester is suitable for testing DC high - voltage within the range of 0.1 - 5.00KV and continuously recording the ... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
