Melt wire drawing apparatus
Product Introduction:
Melt wire drawing instrument is specially designed for the production of rubber and plastic raw material filamentary sample, the instrument through melting, extrusion and wire drawing the powder or granular raw material into a minimum diameter of 10μm filamentary sample for the relevant test use.
Standards:
GB/T2918-2018. ISO 291:2008.MOD, GB/T 3682.1-2018. IS0 1133-1:2011.MOD, GB/T 3682.2-2018. IS0 1133-2:2011.MOD
Product features:
1. Set the melting temperature according to the requirements of raw materials, and the melting unit can melt the raw materials in the barrel.
2. According to the requirements of raw material characteristics and drawing diameter, the extrusion unit will extrude the melted raw material in the barrel by the mouth die at the set speed.
3. According to the requirements of raw material characteristics and drawing diameter, the drawing unit stretches the molten raw material extruded by the die to the designed diameter at the set speed, and winds it at the same time.
Performance parameters:
- Temperature range: room temperature ——400℃
- Die: Φ0.5mm, Φ0.3mm
- Discharge speed: 0——0.2mm/sv
- Winding speed: 0——20000mm/s
- Maximum diameter: Φ60mm
- Maximum pressure: 500N
- Minimum drawing diameter: 10μm
- Dimensions: 500mm*300mm*800mm
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
MARK-II Slip Resistance Tester | Product Introduction: Paste the cut sample on the test fixture of the portable MARK-II anti-slip testing machine, put down the weight of the rotat... |
 |
Automotive wire cyclic bending testing machine | StandardThis testing machine aligns with global automotive industry standards for wire harness reliability, includingISO 6722(Road vehicles –... |
 |
Shoe Abrasion Tester | Product Introduction: The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press ... |
 |
Impact strength tester for car seat headrest | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requirements and test methods" : This standard specifie... |
 |
Air - tightness Testing Device for Automotive Connectors-QINSUN | The air - tightness testing device for automotive connectors uses the pressure principle to conduct non - destructive tightness tests on containe... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
