Geosynthetic Transmissivity Tester

• 

Scope of application:

It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the specified pressure. During the test, seepage was carried out under the condition that the lateral pressure of the sample was 350kPa and the hydraulic gradient i=0.5. and the water seepage of the sample in a certain period of time was measured.

Meet the standard:

JTG E50 T1143-2006.SL/T.JT/T 521- Appendix A-2004.JTS-206-1- Appendix B B.3-2009

JTS/T245-2023.etc.

Instrument features:

Customized pressure gauge with imported high precision diffused silicon pressure sensor and 16-bit high resolution A/D converter;

High energy lithium sub-battery is used to power the pressure gauge, and the continuous use time is more than 1.5 years;

Pressure gauge can be adjusted to zero with one click, suitable for a variety of environments;

"kPa, MPa, Psi, mmHg, Bar, Kgf/cm2" six units can be switched;

The open-type hatch door structure is convenient for sample loading.

The body adopts the casting aluminum integrated molding process to ensure the sealing of the pressure chamber;

The specially designed sample holding device prevents the deformation of the plastic core plate of the drainage plate, combined with the sealing design, to ensure that the sample holding is air-tight and water-tight;

The hydraulic gradient can be adjusted by the height of the water tower.

Reasonable design of waterway pipeline reduces the loss of water head in the test, and the result is more accurate;

Pneumatic control element to control the inlet and outlet of compressed air and the size of pressure, to provide side pressure for the test;

Pressure chamber and seal plate can be customized according to customer requirements to meet different sizes of samples.

Technical parameters:

Test chamber structure is open

The effective length of the sample is 400mm

Sample width 100mm can be customized

Side pressure 350+20kPa(gauge accuracy 0.4%FS)

Head difference adjustment range 0——400mm

Accuracy 0.4%

Dimensions Host :715x300x260mm Water tower :440x440x860mm

Weight 35kg

Other supplier products

	Friction Tester for Non - woven Fabrics	Instrument Description This fabric friction tester can measure the static and kinetic friction coefficients of non - woven fabrics. It can be used...
	Vapor Shrinkage Tester-QINSUN	I. Product Overview TheVapor Shrinkage Testeris a specialized thermal analysis instrument designed to measure dimensional changes in textiles, pol...
	Automotive Wires Low - temperature Impact Tester	Test standard: ISO 6722. ISO 14572. ISO 19642. SAEJ 1128. QC/T 730. JASOD611-2009 Technical parameters: 1) Low temperature impact height: 50-2...
	Blanket Flammability Test Machine	Introduction Bed Blanket Flammability Tester is used to detect the flame retardant performance of the bed blanket fabric and the flame spread prop...
	Civil Aviation Aircraft Interior Non-metallic Materials Flame Retardant Property Tester	Compliance Standards FAR25.853 (FAA Airworthiness Standards for Transport Category Aircraft) CCAR-25-R4.853 (Chinese Civil Aviation Regulations A...

Same products

	MMA-120 Handheld Arc Welder	Seller: 871183	The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
	SHX Series Circulating Fluidized Bed Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
	YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
	DHL Series Coal-Fired Steam Boilers	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
	SZL Series Biomass Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...