Floor Material Burning Performance Tester
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
Email: serving@qinsun-lab。com
Thefloor coverings flammability testeris used to tester a variety of flooring materials, such as: textile carpets, cork, wood, rubber and plastic flooring and floor spray materials. The results can reflect the combustion properties of the floor material (including the substrate), which is used in the test combustion chamber to ignite the floor material placed horizontally and exposed to the tilted thermal radiation field with a small flame. It can be used to evaluate the material flame Communication ability.
Standards
ASTM E648-15 Standard test method for critical radiant flux of floor-covering systems using radiant heat energy source
BS EN ISO Reaction to fire test for flooring-Part1: Determination of the burningbehavior using a radiant heat source
GB/T 11785-2005 Determination of Combustion Performance -Floor material radiation heat source method
ISO 9239-1: Flooring fire reaction test- Part 1: Combustion performance of flooring materials tested by radiant heat
ASTM E 648: Critical Radiant Flux of Floor standard test - covering system uses radiant heat energy
ASTM E 970: Using a Radiant Heat Energy Source, test insulation floorinsulation insulation standard test for Critical Radiant Flux using a radiant heat energy.
NFPA 253: Standard Test Method for using radiant heat energy, test plates overlay system Critical Radiant Flux
Technical Parameters
| Items | Parameters |
| Radiant heat source | Radiation surface size is (300 × 450) mm ± 10mm, the radiation plate can withstand the high temperature of 900 ℃ |
| Specimen fixture | It is made of refractory and (2.0 ± 0.1) mm L-shaped stainless steel. The size of the exposed surface of the specimen is (200 ± 3) mm × (1015 ± 10) mm |
| Igniter | Stainless steel igniter is used for ignition of the specimen. The center line on the average distribution of 19 diameter 0.7mm a radial hole, the center line of 60 degrees on the average distribution of 16 diameter 0.7mm radial hole |
| Propane rotor flow | Propane gas flow can control at (0.026 ± 0.002) L / s, to ensure that the ignition flame height is (60 ~ 120) mm |
| Power supply | AC380V three-phase five-wire system |
| Smoke removal rate | 2.5 ± 0.2 m / s |
| Smoke capacity | 39 ~ 85 m3/ min |
| Items | Parameters |
| The heat balloon anemometer measures the flow rate of the exhaust channel with an accuracy is ± 0.1 m / s | |
| Water-cooled heat flux meter | Heat flux meter Measuring range: 0 ~ 15Kw / m² |
| Heat flux range accuracy | ± 0.2Kw / m2 |
| Heat flux accuracy | <± 3% |
| Temperature sensor | K-type stainless steel installed two thermocouple, diameter is 3.2 mm. Respectively installed in the floor material radiation test box and the flue from the top of the box flue (150 ± 2) mm |
| Radiation pyrometer | The test range is (480 ~ 530) ℃ (black body temperature). The accuracy is ± 0.5 ℃. It is about 1.4m away from the radiation plate. The sensitivity of radiation pyrometer is constant in the wavelength of 1μm to 9μm range |
Send product request
Other supplier products
 |
Walk-in High-Temperature Aging Chamber | Get a quote： Web: qinsun-lab.com Email：serving@qinsun-lab。com Walk-in High-Temperature Aging Chambers are typically assembled on-site using insu... |
 |
Curtain Combustion Tester - Test Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com I. Product Overview TheDrapery Flammability Testeris a specialized instrument des... |
 |
Ozone Aging Chamber | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Ozone Aging Chamber is used to test the colorfastness and aging properties of ... |
 |
IULTCS Veslic Leather Abrasion Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Introduction This machine is suitable for all type... |
 |
Wool Fineness Analyzer - Test Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Wool fiber fineness value is measured by the airflow method. When exerting a certa... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Seller: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
