Cone Calorimeter

Heat release is the core measurement parameter for assessing material and product fire characteristics. The cone calorimeter meets all existing standards (including ISO 5660. ASTM E 1354. ASTM E 1474. ASTM E 1740. ASTM F 1550. ASTM D 6113. NFPA 264. CAN ULC 135 and BS 476. part 15), and also can be purchased in the form of parts, so that the laboratory needs to operate specific tests, such as heat release, loss of quality, smoke generation, etc. You can buy the required parts at first, and then gradually add other instruments to the same test chamber to become a complete set of instrument. This flexible feature is one of the many advantages of the cone calorimeter.

The test theory of the cone calorimeter is based on the fact that the amount of pure combustion calories are proportional to the amount of oxygen burned. Combustion of each 1kg of oxygen will produce 13.1MJ / kg of gas. Parameters such as the heat emissions, ignition time, oxygen consumption rate, production rate of CO and CO2. gas flow, will be measured.

Cone calorimeter is widely used to measure the heat release rate in material combustion process accurately, to evaluate the combustion performance of the material and to measure the core parameters of the product in the fire. It plays a very important role in predicting the fire hazard and its flame prevention and control.

1. 19" standard cabinet integrated design, nice, easy to operate.

2. cone heater - in the truncated cone, 230V, 5000W, heat output is 0 ~ 120 kW / m2.

3. 19 "touch screen computer to control the entire test process.

4. automatic ignition system, automatic measurement of burning time.

5. 3 K-type thermocouples and PID temperature controller to control the temperature in 3 periods.

6. automatic split gate -protect the sample area before the test to ensure the initial quality measurement is stable. The operator can have extra time to run system testing before the start of the test. For flammable samples, if there is no opening and closing mechanism, it is easy to burn at earlier time. This extra time is very important to the operator.

7. sample holder - sample size 100mm x 100mm, thickness of no more than 50mm.

Standards:

ASTM E1354

ISO 5660-1

ASTM E1474

ASTM F1550

ASTM E1740

ASTM D6113

IMO MSC 40 (64)

BS 476-15

NFPA264

NFPA 271

ULC-S135-04

CSNEN45545-2+A1

CSNEN13501-1+A1

parameter:

208-230V 50/60Hz 50A, single phase

5,000w Inconel tubular heater

Spark igniter

Specimen shield

Stainless steel construction of hood, ducting, orifice plate, ring sampling probe, and exhaust blower

Gas toxicity port built into exhaust duct

Variable speed blower

High capacity sample pump constructed with stainless steel pressure head and Teflon diaphragm

Peltier/thermoelectric chiller (fluorocarbon free)

High accuracy weigh cell with 0.01g resolution (Sartorius Load Cell)

Helium-Neon laser light source

Calibrated mass flow controller

Computerized setting of heat flux level

Simplified auto-calibration software

Data output in Microsoft Excel workbook

User customizable calculations, graphing and reporting

High quality gas analyzers

Oxygen analyzer

Paramagnetic

0-100% O? range

Carbon Dioxide

Non-diispersive Infra-red

0-10% CO? range (v/v)

Carbon Monoxide

Non-diispersive Infra-red

0-1.0% CO range (v/v)

Other supplier products

	Wool Fineness Analyzer - lab instrument	Wool fiber fineness value is measured by the airflow method. When exerting a certain pressure air to a certain amount of mass and volume of sample ...
	byk-gardner scrub abrasion tester	Wet Abrasion Scrub TesterIntroductionThe painted or uncoated surface need use a brush, sponge, scouring pad, sandpaper or other methods to test the...
	elmendorf tearing strength tester - Test Equipment	The double pendulum digital tear tester is mainly used to measure the ability of various fabrics (such as clothing fabrics, home textile fabrics, e...
	Din Abrasion Resistance Tester	Din abrasion resistance testerfor rubber is mainly used for the abrasion resistance detection of an elastic material, conveyor belts, rubber, tires...
	MST clothing pressure tester - lab instrument	TheMST Medical Compression Stocking Testeris a specialized instrument designed to evaluate the compression performance, elasticity, and durability ...

All supplier products

Same products

	Blanket Flammability Test Machine	Seller: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	Seller: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	Seller: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	Seller: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	Seller: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...