Fabric Anti-Electromagnetic Radiation Performance Tester - lab instrument

• 

Standards

GB/T23326. GB/T25471. ASTM D4935. SJ2054

Application

It is used for testing the electromagnetic shielding effectiveness of electromagnetic shielding materials such as textiles, plastic sheets, metal foils, surface coatings or platings of non-conductive materials, metal meshes, conductive films, conductive glasses, and conductive medium plates (using the coaxial method).

Features

1. The instrument adopts the coaxial test method, with good transmission characteristics and high testing accuracy.

2. It can perform full-frequency scanning, list scanning, and point-frequency measurement.

3. It uses the internationally preferred coaxial test method to measure the shielding effectiveness of materials, with good transmission characteristics and improved testing accuracy.

4. The instrument automatically controls the emission and reception of signals, automatically collects and processes data, displays curves on the LCD screen, and prints test data with a micro printer, which is easy to operate.

5. The evaluation of the absorption and reflection performance of planar materials against electromagnetic waves can be obtained by calculating the measured parameters.

6. RS232 data interface, with computer software for curve display, data analysis, and storage.

7. It provides a USB interface and supports mobile data storage with a USB flash drive.

Technical Parameters

1. Signal Source:

1.1 Test frequency range: 300 KHz - 3000 MHz

1.2 Frequency stability: ≤ ±5×10⁻⁶

1.3 Frequency resolution: 1 Hz

1.4 Signal purity: ≤ -65dBc/Hz (at 10 KHz offset)

1.5 Output level: -45dBm - +10 dBm

1.6 Level accuracy: ≤ ±1.5dB (25°C ± 5°C, -45dBm - +5 dBm)

1.7 Harmonic suppression ratio: ≥30dB (1MHz - 3000MHz), ≥25dB (300KHz - 1MHz)

1.8 Directivity: ≥50dB (after vector calibration)

1.9 Power scanning: -8dBm - +5dBm

1.10 System impedance: 50 ohms

Other supplier products

	Motorized Notching Machine	Plastic electric notch prototype is a cantilever beam, simply supported beam impact testing machine to do the impact toughness test of non-metallic...
	Skein Length Tester - Test Equipment	I. Product Overview TheFleece Loop Length Testeris a specialized instrument designed to measure the fiber loop length distribution in fleece fabri...
	rca tape scroll abrasion testing machine	TheRCA Abrasion Wear Testeris used to test surfaces for resistance to abrasion and wear. Typically used on painted or plated organic finishes, foil...
	Comprehensive Engine Oil Filter Test Bench - Test Equipment	Application This test bench is designed for comprehensive evaluation of engine oil filters, including spin-on filters and filter bypass valves. It...
	Mattress Rollator	The mattress roller is tested by rolling a 240-pound hexagonal roller 100.000 times (200.000 cycles) across the width of the mattress, equivalent t...

Same products

	Blanket Flammability Test Machine	Seller: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	Seller: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	Seller: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	Seller: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	Seller: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...