In-situ Gas Analysis System for Lithium Battery Thermal Runaway，thermal runaway gas monitoring system
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The In-situ Gas Analysis System for Lithium Battery Thermal Runaway is an advanced testing platform designed to trigger and monitor battery thermal runaway events within a controlled environment. Using a battery cell pressure vessel as the primary trigger carrier, the system integrates real-time signal detection, gas sampling, and online gas composition analysis. It enables flexible sample loading, thermal runaway initiation, and precise monitoring of generated gases, while providing reliable measurement data for gas volume, gas evolution rate, and explosion pressure. This system supports research, production, and safety assessment of lithium batteries, contributing to effective hazard evaluation across multiple applications.
Application
Battery Research and Development
Provides controlled thermal runaway testing for lithium battery cells, enabling analysis of gas composition, pressure evolution, and reaction kinetics.
Battery Manufacturing and Quality Control
Evaluates battery safety and consistency under abuse conditions, supporting process improvements and production safety verification.
Battery Safety Certification
Offers standardized testing aligned with UL 9540A for thermal runaway fire propagation, supporting regulatory compliance.
Academic and Industrial Research
Enables detailed study of battery thermal behavior, including gas generation, explosion pressure, and component analysis, facilitating material and system-level research.
Standards
The system is compliant with the following standard:
(1) UL 9540A-2025 – Standard for Testing Thermal Runaway Fire Propagation in Battery Energy Storage Systems
Parameters
| Item | Specification |
|---|---|
| Platform Dimensions | Determined by sample volume requirements |
| Control Cabinet | 650(L) × 675(W) × 1750(H) mm |
| Fourier Transform Infrared (FTIR) System | 650(W) × 675(D) × 1750(H) mm |
| Power Supply | AC 220 V, 30 A |
| Weight | Approximately 900 kg |
| Backup Gas Source | Nitrogen ≥ 99.99% |
Features
High-Strength Stainless Steel Vessel
304 stainless steel chamber ensures corrosion resistance, high-temperature durability, and mechanical integrity. Design pressure 3 MPa, constant operating pressure 2.5 MPa, with a safety valve for rapid pressure relief.
Multi-Channel Battery Parameter Monitoring
Supports online monitoring of voltage, temperature, and pressure through K-type high-temperature thermocouples and high-precision imported sensors, covering heating, overcharge, and nail penetration trigger modes.
Integrated Environmental Control
Vacuum extraction, nitrogen filling, exhaust, and oxygen concentration detection (0–100% Vol.) are included. Video monitoring allows real-time observation of thermal runaway events.
Automated Gas Sampling System
Multi-layer sample lines with real-time pressure monitoring ensure continuous, accurate gas sampling. Automatic switching prevents blockage and maintains system integrity.
Heated Sampling Lines
Prevents intrusion of liquid electrolyte into analytical instruments, reducing interference and improving gas composition measurement accuracy.
Advanced Gas Analysis
FTIR spectrometer and electrochemical sensors, combined with a professional analysis model, enable precise online measurement of complex gases produced during battery thermal runaway.
User-Friendly Control Software
Intuitive interface, low latency, real-time monitoring of gas composition, battery parameters, and environmental conditions.
Extended Data Processing
Automatic calculation modules for gas evolution rate and total gas volume, with seamless integration into the software for data visualization and reporting.
Accessories
(1) Multi-layer gas sampling lines
(2) Pressure and temperature sensors
(3) Vacuum pump and nitrogen supply interface
(4) FTIR spectrometer
(5) Electrochemical gas sensors
(6) Heated pipeline assembly
(7) Video monitoring system
(8) Control cabinet with PLC and touchscreen
Test Procedures
Sample Installation: Place battery cells into the pressure vessel and secure the chamber.
System Setup: Connect nitrogen supply and configure oxygen concentration requirements.
Parameter Configuration: Set monitoring channels for voltage, temperature, pressure, and gas analysis in the control software.
Initiate Thermal Runaway: Trigger the battery using heating, overcharge, or nail penetration methods.
Data Acquisition: Real-time monitoring of gas composition, internal pressure, temperature, and battery parameters. Automated calculation of gas evolution rate and total gas volume.
Observation and Recording: Monitor test via video feed and software interface.
Test Completion: Safely vent the vessel, retrieve battery cells, and store collected data for analysis and reporting.
Maintenance Information
Inspect vessel seals, flanges, and sampling connections regularly for integrity.
Calibrate temperature, pressure, and gas sensors periodically.
Clean sampling lines and FTIR components to prevent contamination and measurement errors.
Verify nitrogen supply, vacuum pump operation, and safety valve function before each test.
Backup all acquired test data and system logs for traceability and reporting purposes.
Conclusion
The In-situ Gas Analysis System for Lithium Battery Thermal Runaway provides a robust and fully integrated platform for triggering, monitoring, and analyzing thermal runaway events in lithium batteries. With real-time gas composition analysis, multi-parameter monitoring, and automated data processing, it enables accurate testing in compliance with UL 9540A-2025. supporting research, manufacturing, certification, and safety evaluation efforts.
Send product request
Other supplier products
 |
Floor Caster Wear Tester | The Floor Caster Wear Tester is designed to evaluate the wear resistance of chair casters on various floor coverings, including resilient and lamin... |
 |
Shoe heat insulation meter -- sand bath | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 20991: Determines thermal insulation of safety shoe soles under simulated ho... |
 |
Autocatalytic Decomposition Temperature Tester with Thermal Insulation，autocatalytic decomposition temperature measurement | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Autocatalytic Decomposition Temperature Tester with Thermal Insulation (Adiabatic SADT ... |
 |
Automatic Reaction Calorimeter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB 51283 GB/T 22232 GB/T 17802 SN/T 3078.1 Product Features 1. It offers th... |
 |
Coatings Shear | Standard YY/T 0856-2011 (China): Specifies mechanical testing protocols for metal angular fixators, including single-compression bending and bendi... |
Same products
 |
Mini Jewelry Laser Welding Machine | Seller: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Pulse Laser Cleaner | Handheld Solution for Precision Surface Cleaning for Rust & Coating | Seller: Beijing JCZ Technology Co., Ltd | Looking for an efficient and eco-friendly laser cleaning machine? The HCP Series Pulse Laser Clea... |
 |
Mini Type Laser Marking & Engraving Machine – Fiber & UV Laser Options for Precise Marking | Seller: Beijing JCZ Technology Co., Ltd | This compact, Mini Type fiber laser marking machineis perfectly suited for small businesses, work... |
 |
Large Enclosed Laser Marking & Engraving Machine for Industrial Use | Seller: Beijing JCZ Technology Co., Ltd | The Large Closed Laser Marking Machineis a high-performance engraving solution designed for indus... |
 |
Axial force wire guide apparatus | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YYT0807 - 2010 :Standard Guide... |
