Automotive cable transmission efficiency test system
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
This tester is applicable for efficiency testing of various vehicle control cables and flexible shafts, including:
(1) Automotive throttle cable efficiency testing
(2) Automotive clutch cable efficiency testing
(3) Automotive gear shift cable efficiency testing
(4) Automotive brake and parking brake cable efficiency testing
(5) Motorcycle throttle, clutch, and brake cable efficiency testing
(6) Bowden cables and flexible shaft transmission efficiency testing
(7) Control cables for electric vehicles, light vehicles, and specialty vehicles
(8) R&D, type testing, and mass production quality inspection of control cables
Standards
(1) Q/CT 29101-92 — Automotive Cable Assemblies
(2) QC/T 29101-2014 (Reference) — Automotive Control Cable Assemblies
(3) Q/SQR.04.828-2007 — Automotive Control Cable Efficiency Test Method
(4) Q/SQR.04.285 — Automotive Control Cable Performance Test Specification
(5) Q/SQR.04.405-2006 — Motorcycle Control Cable Assemblies Test Method
(6) Q/SQR.04.821-2007 — Automotive & Motorcycle Flexible Shaft and Cable Performance Test Specification
Accessories
| Name | Description |
|---|---|
| Cable-specific fixtures | Secure cable ends |
| T-shaped guide plate | Cable installation and routing |
| Curve forming mechanism | S-shape or U-shape routing simulation |
| Force sensors | Measure tension and fixed end load |
| Displacement sensors | Measure stroke and displacement |
| Print paper | Output for test data and curves |
| Fasteners | For fixing specimens |
Test Procedures
(1) Install the cable specimen according to the selected layout (straight, S-shape, or U-shape) per the applicable standard.
(2) Securely clamp both ends using the appropriate fixtures to prevent slippage.
(3) Set push/pull speed according to the relevant standard or company specification.
(4) Start the test; the system applies controlled push-pull forces while measuring force and displacement at both ends.
(5) Monitor the test to ensure smooth loading and consistent data collection.
(6) Upon completion of the specified stroke or cycle, stop the test.
(7) Record data, generate force–force and displacement–time curves, and calculate load and displacement efficiency.
Maintenance Information
(1) Regularly check the clamping fixtures, T-guides, and curve forming mechanisms for wear or loosening.
(2) Keep moving parts clean and lubricated.
(3) Periodically verify the calibration and accuracy of force and displacement sensors.
(4) Replace consumables such as print paper as needed.
(5) Ensure the control system and power supply are functioning properly.
Send product request
Other supplier products
 |
Seatbelt Fabric Pilling Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Seatbelt Fabric Pilling Tester is designed to simulate the pilling and wear of garments... |
 |
Spring Torsion Deflection Testing Machine ISO Certified Method | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Application It is used to evaluate the torsional strength, stiffness, and fa... |
 |
Automated Clothing Thermal Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard The instrument is designed and tested in compliance with the following internatio... |
 |
Vacuum Leak Detection Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications 1. Automotive Industry In automobile manufacturing, sealing performance is d... |
 |
OSU Heat Release Rate Test Device for Building Materials | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The apparatus supports compliance with the following standards: BSS 7322 &ndash... |
