Liquid-Filled Test Dummy
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Applications
Water-filled Dummies are widely used by automotive manufacturers both domestically and internationally.
Standards
Toyota, Honda, Nissan; Mercedes-Benz, BMW, Volkswagen; General Motors, Ford; Hyundai, Kia; as well as automakers from India, Pakistan, Europe, South Africa, the Middle East, and domestic Chinese manufacturers including SAIC, FAW, BAIC, Volkswagen, King Long, Yutong, JAC, Geely, BYD, Haima, and others.
Parameters
1. 75kg Class Weight Dummy
| Item | Specification |
|---|---|
| External Dimensions | 690 × 520 × 400mm |
| Standard Volume | 70L |
| Material | High-strength PE |
| Left-Right Width | 400mm |
| Front-Rear Width | 520mm |
| Center of Gravity Height | 240mm |
| Base Height | 240mm |
| Total Height | 690mm |
| Water Inlet Diameter | 86mm |
| Application | Automobile, locomotive, high-speed rail, or space simulation |
| Ballast (Liquid) | Liquid (water), total weight 65–75kg after filling |
| Ballast (Solid) | Solid (sand/pebbles/glass beads/iron sand), total weight 100–120kg |
| Customization | Customizable color, shape, size, lifting straps, lifting rings, sensors, etc. |
2. 85kg & 90kg Class Weight Dummy
| Item | Specification |
|---|---|
| External Dimensions | 700 × 620 × 400mm |
| Standard Volume | 85L |
| Material | High-strength PE |
| Left-Right Width | 400mm |
| Front-Rear Width | 620mm |
| Center of Gravity Height | 240mm |
| Base Height | 240mm |
| Total Height | 700mm |
| Water Inlet Diameter | 86mm |
| Application | Automobile, locomotive, high-speed rail, or space simulation |
| Ballast (Liquid) | Liquid (water), total weight 85–95kg after filling |
| Ballast (Solid) | Solid (sand/pebbles/glass beads/iron sand), total weight 120–140kg |
| Customization | Customizable color, shape, size, lifting straps, lifting rings, sensors, etc. |
Accessories
Compatible with sandbags in the following weights: 1kg, 3kg, 5kg, 7kg, 10kg, 15kg, 20kg, 30kg, 40kg, 50kg
Test Procedures
1.Selection: Choose the appropriate dummy class (75kg or 85/90kg) based on the occupant profile required by your test standard.
2.Filling: Place the dummy on a scale. Use the 86mm inlet to fill it with water (for standard weight) or solids (for higher weight) until you reach the target mass.
3.Positioning: Place the dummy centrally in the vehicle seat. Ensure the base is flush against the seat back to maintain the correct CoG.
4.Binding: Pull the vehicle seatbelt across the dummy and click it into the buckle. Tighten the belt to ensure the dummy remains stationary during acceleration or braking.
5.Verification: Check that the dummy does not interfere with steering or other cabin controls if placed in the front seats.
6.Drainage: After testing is complete, drain the liquid to return the dummy to its lightweight state for easy storage.
Send product request
Other supplier products
 |
Infusion device Leakage negative pressure tester | Application The tester is suitable for leakage testing of medical infusion devices in the following industries and products: (1) Medical Quality ... |
 |
Glow wire tester，EN 60695 glow wire，Fire hazard tester for electrical insulators | Application It is used in the evaluation of flammability tests and light-off temperature tests for electrical equipment and its components and acc... |
 |
Automated Freezing/Pour Point Chiller Tester | Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f... |
 |
Monomer combustion test device for building materials,Building material products single combustion tester | Meet the standard: Comply with GB/T 20284 standard requirements "Building materials or products of the single combustion test" EN13823 "Monomer C... |
 |
Gas Oxidizing Property Tester | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylinder Valve Exhaust Ports by Determination of Combusti... |
Same products
 |
Tabletop Xenon Arc Weathering Tester (SunMaster) | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat... |
 |
Blow-By Test Rig | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa... |
 |
Air filter System（ISO 16890/EN 779） | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a... |
 |
Oil Thread Leak Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan... |
