Automated memory impact testing machine for research labs
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
Tapered twin-screw extruders are primarily used for direct forming of pipes, sheets, and profiles from materials such as rigid polyvinyl chloride (UPVC), while also serving as plastic modifiers and pelletizers for powder materials. With different molds, they can directly extrude sheets, pipes, and profiles for experimental purposes.
Standards
JB/T 11343-2013：Martindale Abrasion and Pilling Tester
JB/T 5420-2014：Fabric Abrasion Tester
JB/T 6492-2014：Fabric Pilling Tester
JB/T 6491-2015：Fabric Snagging Tester
T/GDPIA 21-2020：Test Method for Abrasion and Pilling Resistance of Textiles (Martindale Method)
T/GDPIA 16-2020：Test Method for Fabric Pilling Resistance
T/GDPIA 22-2020：Test Method for Fabric Snagging Resistance
T/ZZB 1351-2019：Specification for Fabric Abrasion and Pilling Tester
T/CPMIA 0201-2022：Test Method for Abrasion Resistance of Textile Materials (Martindale Method)
Technical Parameters
| Category | Specification |
|---|---|
| Impact Energy | 2/4 J (simply supported beam); 2.75/5.5 J (cantilever) |
| Sampling Rate | 10 µs |
| Resolution | 16 bits |
| Load Measurement Accuracy | ≤ 1% |
| Impact Knife Angle | 30° |
| Pendulum Torque (Simply Supported Beam) | 2.1436 Nm, 1.0718 Nm, 0.5359 Nm |
| Pendulum Torque (Cantilever Beam) | 2.9474 Nm, 1.4737 Nm |
| Pendulum Pre-lift Angle | 150° |
| Simply Supported Beam | |
| Impact Speed | 2.9 m/s |
| Distance from Pendulum Shaft Center to Sample Center | 230 mm |
| Blade Angle | 30° |
| Blade Radius | 2 mm |
| Support Corner Radius | 1 mm |
| Support Front Angle | 5° |
| Support Rear Angle | 10° |
| Support Span | 40. 60. 70 mm |
| Sample Type and Size (L × W × T) | 380×10×4 mm, 50×6×4 mm, 120×15×10 mm |
| Cantilever Beam | |
| Impact Speed | 3.5 m/s |
| Distance from Pendulum Shaft Center to Sample Center | 335 mm |
| Blade Angle | 75° |
| Blade Radius | 0.8 mm |
| Front Edge Angle | 5° |
| Blade Back Angle | 10° |
| Sample Type and Size (L × W × T) | 80×10×4 mm63.5 × 12.7 × 12.7 mm63.5 × 12.7 × 6.4 mm63.5 × 12.7 × 3.2 mm |
Pre-Operation Checks
Equipment Status: Inspect switches and instrument functions; verify protective devices are intact.
Personal Protection: Wear earplugs, safety goggles, gloves, etc.
Material Preparation: Clean the storage bin; fill with material after confirming no impurities.
Send product request
Other supplier products
 |
Aerospace Fabric UV Stabilization Analyzer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Textile UV Protection Performance Tester is a high-precision optical inst... |
 |
Flooring VOC Emission Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 16000-9(Indoor Air - Determination of Volatile Organic Compounds) ASTM D51... |
 |
Steaming Cylinder | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for s... |
 |
Transmission belt flammability and flame diffusion characteristics tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction The conveyor belt flammability and flame diffusion tester is suitable... |
 |
Computer-controlled Helmet Impact Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com A computer-controlled helmet impact tester is an instrument used to test the impact resista... |
