Automated memory impact testing machine for research labs
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
Tapered twin-screw extruders are primarily used for direct forming of pipes, sheets, and profiles from materials such as rigid polyvinyl chloride (UPVC), while also serving as plastic modifiers and pelletizers for powder materials. With different molds, they can directly extrude sheets, pipes, and profiles for experimental purposes.
Standards
JB/T 11343-2013：Martindale Abrasion and Pilling Tester
JB/T 5420-2014：Fabric Abrasion Tester
JB/T 6492-2014：Fabric Pilling Tester
JB/T 6491-2015：Fabric Snagging Tester
T/GDPIA 21-2020：Test Method for Abrasion and Pilling Resistance of Textiles (Martindale Method)
T/GDPIA 16-2020：Test Method for Fabric Pilling Resistance
T/GDPIA 22-2020：Test Method for Fabric Snagging Resistance
T/ZZB 1351-2019：Specification for Fabric Abrasion and Pilling Tester
T/CPMIA 0201-2022：Test Method for Abrasion Resistance of Textile Materials (Martindale Method)
Technical Parameters
| Category | Specification |
|---|---|
| Impact Energy | 2/4 J (simply supported beam); 2.75/5.5 J (cantilever) |
| Sampling Rate | 10 µs |
| Resolution | 16 bits |
| Load Measurement Accuracy | ≤ 1% |
| Impact Knife Angle | 30° |
| Pendulum Torque (Simply Supported Beam) | 2.1436 Nm, 1.0718 Nm, 0.5359 Nm |
| Pendulum Torque (Cantilever Beam) | 2.9474 Nm, 1.4737 Nm |
| Pendulum Pre-lift Angle | 150° |
| Simply Supported Beam | |
| Impact Speed | 2.9 m/s |
| Distance from Pendulum Shaft Center to Sample Center | 230 mm |
| Blade Angle | 30° |
| Blade Radius | 2 mm |
| Support Corner Radius | 1 mm |
| Support Front Angle | 5° |
| Support Rear Angle | 10° |
| Support Span | 40. 60. 70 mm |
| Sample Type and Size (L × W × T) | 380×10×4 mm, 50×6×4 mm, 120×15×10 mm |
| Cantilever Beam | |
| Impact Speed | 3.5 m/s |
| Distance from Pendulum Shaft Center to Sample Center | 335 mm |
| Blade Angle | 75° |
| Blade Radius | 0.8 mm |
| Front Edge Angle | 5° |
| Blade Back Angle | 10° |
| Sample Type and Size (L × W × T) | 80×10×4 mm63.5 × 12.7 × 12.7 mm63.5 × 12.7 × 6.4 mm63.5 × 12.7 × 3.2 mm |
Pre-Operation Checks
Equipment Status: Inspect switches and instrument functions; verify protective devices are intact.
Personal Protection: Wear earplugs, safety goggles, gloves, etc.
Material Preparation: Clean the storage bin; fill with material after confirming no impurities.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Hydraulic Pump Contamination Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Hydraulic Pump Contamination Resistance Tester is primarily used to test ... |
 |
Metal Bone Screws Self - tapping Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 6475: Implants for surgery – Wear of total hip-joint prostheses ASTM F... |
 |
Coating abrasion resistance test device | Product Introduction: The determination of scratch resistance of the coating is very similar to the scratch test of the coating, but this test met... |
 |
Xenon Arc Weatherometer | IntroductionThe xenon arc lamp, which is capable of simulating the whole natural sunlight spectrum in the most consistent manner, can reproduce the... |
 |
Air Flow Velocity Distribution Test System，wind velocity distribution measurement system | Whats/App: +86 156 1874 6768 Web: standard-groups.com Test System for the characterisation of the air flow velocity profile of components (e.g. t... |
Похожие товары
 |
G651 Shoes Bending Tester | Продавец: Standard Groups | The Shoe Bending Tester is designed to evaluate the flexing resistance and durability of finished... |
 |
Geotextile Dynamic Puncture Tester | Продавец: Standard Groups | The geotextile dynamic puncture tester is used to test the resistance of various geotextile mater... |
 |
Artificial turf wear tester | Продавец: Standard Groups | An artificial turf wear tester is a device specifically designed to evaluate the wear resistance ... |
 |
Leather Shoe Hook Core Longitudinal Bending Stiffness Tester | Продавец: Standard Groups | The Leather Shoe Hook Core Longitudinal Bending Stiffness Tester is designed to measure the longi... |
 |
Geosynthetics Bursting Strength Tester | Продавец: Standard Groups | The geotechnical synthetic material comprehensive testing instrument is used for testing the mech... |
