Custom impact abrasion resistance tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
You use this tester to evaluate the abrasion resistance of motorcycle protective clothing under impact conditions.
It is suitable for testing motorcycle jackets, pants, protective suits, reinforced fabric panels, elbow and knee protection areas, and other protective components used in motorcycle rider apparel.
Standards
The Protective Clothing Impact Abrasion Tester complies with the following standard:
(1) GB/T 24278-2019 Protective clothing for motorcycle riders
Parameters
| Item | Specification |
|---|---|
| Control System | Industrial-grade PLC |
| Operation Interface | 7-inch color touchscreen, Chinese/English |
| Operation Mode | Full touchscreen operation, programmable test settings |
| Printer | Built-in printer |
| Belt Speed | 8 m/s |
| Belt Hardness | Grit OP60 |
| Abrasion Area | 1963 mm² |
| Applied Force on Specimen | 49 N |
| Net Pressure on Specimen | 25 kPa |
| Drop Height | 50 mm |
| Specimen Holder | Diameter Φ75 mm |
| Cleaning Brush | Diameter Φ200 mm, polypropylene bristles, 0.2 mm thickness, 45 mm free length |
| Software Interface | USB interface, data reading and PC connection |
Features
You can set test parameters directly through the intelligent control system.
The tester performs automatic cyclic testing after parameter input, reducing manual intervention.
You can pause the test at any time to observe specimen abrasion by opening the safety door.
A servo drive system ensures fast response, stable speed, and no speed fluctuation during testing.
The system provides stable and repeatable test results for impact abrasion evaluation.
Test Procedures
You fix the specimen securely in the specimen holder.
Set test parameters such as speed and test conditions via the touchscreen interface.
Start the test, and the specimen is subjected to impact abrasion through controlled motion.
During the test, you may pause operation to inspect abrasion damage if required.
After completion, test data can be printed or transferred to a computer for analysis.
Maintenance Information
You should regularly clean the abrasion belt and cleaning brush to ensure consistent test conditions.
Mechanical and drive components should be inspected periodically for stable operation.
Electrical connections and the control system should be checked to prevent faults.
Routine calibration and inspection help maintain long-term accuracy and reliability.
Send product request
Other supplier products
 |
Walk-in Humidity Test Chamber High and Low Temperature Aging Room | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Walk-in High-Temperature Aging Chambers are typically assembled on-site using... |
 |
Oil Separator Filtration and Separation Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Test System SPT for testing of separator, especially for blow-by oil mist sep... |
 |
UV-master Accelerated Aging Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The UV-master Ultraviolet Aging Test Chamber is widely used for testing light ... |
 |
Airflow Velocity Distribution Measurement Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications development of filter housings and air-ducting elements in general compariso... |
 |
Face Mask Tensile Tester丨Face Mask Tensile Test machine | Introduction: The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ... |
Same products
 |
Custom five-finger scratch testing system | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Five-Finger Scratch Tes... |
 |
Cross cut adhesion testing equipment supplier | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards PV 3952 Plastic interior parts... |
 |
Automatic radiant protective performance tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Outdoor Sports Gear: Evaluat... |
 |
Clothing Wearing Tactile Pressure Tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You use this tester to asses... |
 |
Splash and spray liquid resistance testing system supplier | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You use this tester to asses... |
