Martindale Abrasion And Pilling Tester
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Martindale Abrasion & Pilling Tester To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abrasives at low pressures and in continuously changing directions. The amount of abrasion or pilling is compared against standard parameters.The unique design of our Martindale abrasion tester allows removal of individual sample holders for examination without lifting the top motion plate. It provides individual counters and parking function, interval time settable and a large touch-screen display. Standard sample holders and 9 and 12kpa Weights are included.The Martindale abrasion tester is available with 4. 6. 8 or 9 test positions.
Application
(1) Woven and knitted fabrics (cotton, polyester, blends)
(2) Upholstery textiles (sofas, curtains, automotive interiors)
(3) Coated fabrics and artificial leather
(4) Leather materials
(5) Quality control laboratories and third-party testing agencies
Testing Standards
ISO12947:TextileabrasionresistanceteststandardusingtheMartindalemethodtoevaluatespecimendamage,massloss,andappearancechanges.
ISO5470-2:Abrasionresistancetestforrubberorplastic-coatedfabrics,measuringwearvolumeorrateviatheMartindaleabrasionmachine.
GB/T13775:Textileseawatercolorfastnesstest,assessingcolorchangeofspecimensandstainingofadjacentfabricsafterseawaterimmersion.
GB/T21196:Textilepillingresistancetestusingthecircularlocusmethodtosimulatefriction-inducedpilling.
FZ/T20020:Wooltextileappearanceretentiontestafterwashing,evaluatingdimensionalstability,wrinkling,andaccessorychangespost-wash.
ASTMD4966:Textileabrasionresistancetest(Martindalemethod)forapparelandhomefurnishings.
BS3424-24:Textilewaterspotcolorfastnesstest,ratingcolorchangeandstainingafterwaterimmersion.
IWTODRAFTTM40:WooltextiledimensionalstabilitytestusingtheMartindalemethodtoassessabrasionresistanceandappearancechanges.
ISO20344:Footweartestmethodsstandardcoveringmechanical(abrasion,punctureresistance)andchemical(waterproofing,slipresistance)properties.
BSEN388:Protectiveglovesmechanicalperformanceteststandard,includingabrasion,cutresistance(Coupe/TDM),tear,andpunctureresistanceratings.
BS-EN-13770:KnittedfootwearabrasionresistanceteststandardviatheMartindalemethodtoevaluatefabricwearperformance.
ISO12945:Textileabrasionresistancetest(possiblyrelatedtopilling),requiringconfirmationwiththestandardtextforspecifics.
GB/T4802.2:Textilepillingresistancetestusingthecircularlocusmethodtogradesurfacepillingonfabrics.
ASTMD4970:Textilecolorfastnesstorubbingtest,assessingdry/wetdyetransferwithgrayscaleratings.
M&SP17:Marks&Spencerstandardwashcolorfastnesstest,evaluatingcolorretentiononspecifiedadjacentfabricspost-laundering.
WoolmarkTM196:Wooltextileshrink-proofcertification,testingfeltingandappearancechangesaftermachinewashing/dryingtomeetWoolmarkrequirements.
Martindale abrasion tester working principle:
Test piece of fabric is placed in the specimen clamp, and it will be rubbed against with abradant in a Lissajous figure. According to the requirement, once the test piece is broken, test piece should be taken down to calculate its abrasion resistance index, or evaluate its rating of pilling through the visual description.
Features
Multi-stroke quick change design The aerospace-grade aluminum material cover is a kind of removably designed for easy installation of specimens; Multiple standard speeds are available, which involving 47.5 rpm and 0.5X47.5 rpm, 1.25X47.5 rpm, and1.5x47.5rpm.
Intelligent operating touch screen
Color touch screen with icon control, easy to understand and use, bilingual switching between Chinese and English, single and multiple test options, with friction materials life reminder function, and two kinds of operatingmodes like built-in standard test program and custom test.
Stainless steel weight&imported aviation aluminum guide plate The working guide adopts a small degree of deformation of the aviation aluminum material; the weight and the test position are correspondingly numbered, which is convenient for recording the test result and analyzingthe test result; supportingthe installation of the weight and the sample fixing auxiliary fixture to reduce the deviation of the result caused by theoperation difference.
Multiple test loads available
The Martindale Wear and Puckering Tester is available with three loads, 3 kPa, 9 kPa and 12 kPa; it can also perform a puckering test; it is powerful, safe and reliable.
Highly automated
The instrument has a variety of built-in experimental modes that can be set to single or multiple modes. The instrument will beep when the test value reaches the preset value, and you can also set a countdown timer, which is both convenient and efficient.
Instrument Configurations and Consumables
Specifications
Drive system is PLC, programmable control with large touch-screen
①、Abrasion test
Max stroke of movement 5+/-0.5mm
Weight of holder and spindle 200+/-1g
②、Pilling test
Max stroke of movement 24+/-0.5mm
Weight of holder and spindle 155+/-1g
Technical Parameters
|
Working stations:4 |
Pilling friction head: Clamping diameter 90mm, weight 155g |
|
Working mode: Fully automatic |
Sample filling hammer weight: 2385±10g |
|
Control panel: Full color touch screen control |
Large Lisa drawing: 60.5±0.5mm |
|
Language: Bilingual operation interface(CN/EN) |
Small Lisa drawing: 24±0.5mm |
|
Test speed: 47.5rpm and its times of 0.5. 1.25. and1.5(adjustable) |
Counting range: 0-999999 times |
|
Fuzzing and pilling fixture load block weight: 260g |
Weight: 70Kg |
|
Wear-resisting fixture pressure: 3kpa, 9kpa, and 12kpa |
Power supply: 220V 50HZ |
|
Wear-resisting friction head: Clamping diameter 28.8mm, weight 198g |
Diamensions:700mm*700mm*450mm |
Send product request
Other supplier products
 |
Dry Sand Rubber Wheel Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of... |
 |
Dry Sand Rubber Wheel Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machi... |
 |
Drying Rate Tester Heated Plate Method ISO Standard Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards AATCC 201-2013 Fabric Drying Rate: Hot Plate Method FZ/T 01176-20... |
 |
Vacuum leak tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injectio... |
 |
Heat Extension Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Heat Extension Tester is designed to measure the elongation and deformation of electric... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
