Automotive Wire Low-Temperature Winding Tester
Get a quote：
Whats/App: +86 181 0160 0864
The Automotive Wire Low-Temperature Winding Tester is designed for evaluating wires, cables, and electrical accessories under low-temperature conditions. It supports low-temperature impact, bending, and winding tests to assess the performance of products in cold environments, ensuring electrical and mechanical reliability.
Application
Low-temperature adaptability testing of wires, cables, and electrical components.
Assessment of electrical insulation, conductor performance, and mechanical durability at sub-zero temperatures.
Suitable for quality control in electrical, electronics, and instrumentation industries.
Evaluates product reliability during storage, transportation, and operation in extreme temperature environments.
Can be used to assess resistance to corrosive conditions when combined with chemical exposure tests.
Standards
GB/T 2951.14-2008 (Low-temperature dynamic bending of wires and cables)
GB/T 5023.1-2008 (Electric cables – General test methods)
ISO 6722 (Road vehicles – Electrical cables)
ISO 14572 (Automotive wire bending tests)
ISO 19642 (Low-voltage insulated cables – Cold performance)
SAE J1128 (Low-voltage automotive cables)
QC/T 730 (Automotive wire testing)
JASO D611-2009 (Japanese automotive wire standard)
Parameters
| Parameter | Specification |
|---|---|
| Working Temperature | -40℃ ±1℃ |
| Mandrel Diameter | D ≈ 4–5 × wire diameter |
| Low-Temperature Sample Diameter | Φ2.5–12.5 mm |
| Winding Speed | 1 turn / 6 seconds |
| Samples per Run | 1–2 pieces |
| Winding Rod Diameters | Φ2.5, Φ4, Φ5, Φ6, Φ7, Φ10, Φ12, Φ14, Φ16, Φ18, Φ20, Φ24, Φ32, Φ35, Φ38, Φ50 mm (17 rods total) |
| Through-Line Sleeves | Φ1.2, Φ2, Φ2.5, Φ3.5, Φ5, Φ6, Φ10, Φ12, Φ14.5, Φ16 mm |
| Sample Winding Turns | 2–5 turns; winding time set according to mandrel diameter (max 36s) |
| Operation Mode | Electric |
| Power Supply | AC 220V ±10%, 20A, 50Hz |
Send product request
Other supplier products
 |
PV Module Testing Equipment – UV Aging Test Chamber | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The UV Aging Test Chamber for photovoltaic (PV) modules is designed to simulate lo... |
 |
Schopper Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 The Schopper abrasion tester is a precision device specifically designed to evaluate the abrasion resis... |
 |
Zipper torsion tester / Zipper Torsion Testing Machine | Product Introduction: The zipper torsion tester is used to test the binding strength of the zipper pull head and whether it can withstand the spec... |
 |
Fluoropolymer Wire Dynamic Cut-Through Tester | Get a quote： Whats/App: +86 181 0160 0864 The Fluoropolymer Wire Dynamic Cut-Through Tester is a precision instrument designed to evaluate the me... |
 |
Five-Finger Scratch Tester | Get a quote： Whats/App: +86 181 0160 0864 The Five-Finger Scratch Tester is a precision instrument designed to assess the scratch resistance of a... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
