Friction and Wear Test Machine
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Friction and Wear Testing Machine is a precision instrument designed to measure the coefficient of friction, wear volume, and related mechanical properties of materials under controlled load and speed conditions. Driven by an AC servo motor with a gear-and-rack transmission system, the machine delivers stable and accurate motion control. The worktable supports both constant load and continuous loading modes, enabling reliable low-, medium-, and high-load testing to meet the analytical requirements of laboratory research and industrial development.
Application
Materials science research: Evaluation of friction and wear behavior of metals, alloys, ceramics, polymers, and composite materials
Surface treatment and coating assessment: Wear resistance testing of surface treatments and coatings, including powder coatings, sprayed layers, and heat-treated surfaces
Mechanical component performance evaluation: Tribological analysis of gears, bearings, sliding pairs, and contact components
Industrial quality control: Routine friction and wear testing during production to ensure compliance with performance requirements
Academic and research laboratories: Fundamental tribology research and educational testing
Typical test samples include:
Metallic and alloy specimens
Ceramic and coated surfaces
Polymer films, sheets, and molded parts
Composite materials
Mechanical contact components
Standards
GB/T 6040-2008 Test Method for Wear Resistance of Metal Surfaces
GB/T 17657-2022 Test Methods of Evaluating the Properties of Wood-Based Panels and Surface-Finished Panels (including abrasion and scratch tests)
ISO 20502 Fine Ceramics and Coatings — Scratch and Wear Testing
ASTM D3702 Test Method for Wear Rate of Materials Using a Rotating Drum Apparatus
ASTM D1894 Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
JIS K 7317:2022 Plastics — Film and Sheeting — Determination of Coefficient of Friction
JIS L 0849 Testing Methods for Abrasion Resistance of Plastic Products
Parameters
| Parameter | Specification |
|---|---|
| Sliding speed | 5 mm/min – 6000 mm/min |
| Drive motor | AC servo motor |
| Drive mechanism | Rack and pinion |
| Sliding distance | 1 – 100 mm |
| Motion mode – single | Stops automatically after preset distance |
| Motion mode – reciprocating | Reciprocating motion at set distance (up to 9.999.999 cycles) |
| Measurement range | 0 – 1000 gf |
| Safety device | Overload protection |
| Operating environment | 0 – 50 °C, ≤85% RH, non-condensing |
| Power supply | AC 100 V, 50/60 Hz |
| Dimensions | W 475 × D 450 × H 475 mm (excluding protrusions) |
Send product request
Other supplier products
 |
Carpet Static Load Tester | Get a quote： Whats/App: +86 181 0160 0864 The Carpet Static Load Tester is a precision instrument designed to simulate the imprints left by furni... |
 |
Rotary reciprocating friction and wear tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Reciprocating-Rotary Friction and Wear Tester (Type 1) is designed for evaluat... |
 |
Safety Helmet Flammability Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Safety Helmet Flammability Tester is designed to evaluate the flame-retardant ... |
 |
Helmet Xenon Aging Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The helmet xenon lamp aging tester is a device that simulates the damage caused by... |
 |
Porton Thermal Manikin Equipment ISO 12949 | Product Introduction: Porton-man was commissioned by the Defense Science and Technology Laboratory (DSTL) to accurately represent military users. ... |
Same products
 |
Resistance Loop Bands | Seller: Shanghai Pisces Sporting & Leisure Products Co., Ltd | Resistance Loop Bandsare versatile fitness tools designed to enhance muscle strength, flexibility... |
 |
Stainless Steel Flux Cored Welding Wire E308T1-1 E308HT1-1 E308LT1-1 Gas Shielded FCAW Wire for 304 Stainless Steel Welding | Seller: 863048 | Product Description stainless steel flux cored wire E308T1-1 E308HT1-1 E308LT1-1,FCAW stainless ... |
 |
E317LT1-1 Flux Cored Wire CO2 Stainless Steel 70% Flux Content 1.0/1.2/1.6mm Diameter OEM Customized 1200C Melting Point | Seller: 863048 | XUNZHUO STAINLESS STEEL CORED WELDING WIRE E317LT1-1 CLASSIFICATION: There are ones with diamet... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | Seller: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | Seller: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
