Friction and Wear Test Machine
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Friction and Wear Testing Machine is a precision instrument designed to measure the coefficient of friction, wear volume, and related mechanical properties of materials under controlled load and speed conditions. Driven by an AC servo motor with a gear-and-rack transmission system, the machine delivers stable and accurate motion control. The worktable supports both constant load and continuous loading modes, enabling reliable low-, medium-, and high-load testing to meet the analytical requirements of laboratory research and industrial development.
Application
Materials science research: Evaluation of friction and wear behavior of metals, alloys, ceramics, polymers, and composite materials
Surface treatment and coating assessment: Wear resistance testing of surface treatments and coatings, including powder coatings, sprayed layers, and heat-treated surfaces
Mechanical component performance evaluation: Tribological analysis of gears, bearings, sliding pairs, and contact components
Industrial quality control: Routine friction and wear testing during production to ensure compliance with performance requirements
Academic and research laboratories: Fundamental tribology research and educational testing
Typical test samples include:
Metallic and alloy specimens
Ceramic and coated surfaces
Polymer films, sheets, and molded parts
Composite materials
Mechanical contact components
Standards
GB/T 6040-2008 Test Method for Wear Resistance of Metal Surfaces
GB/T 17657-2022 Test Methods of Evaluating the Properties of Wood-Based Panels and Surface-Finished Panels (including abrasion and scratch tests)
ISO 20502 Fine Ceramics and Coatings — Scratch and Wear Testing
ASTM D3702 Test Method for Wear Rate of Materials Using a Rotating Drum Apparatus
ASTM D1894 Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
JIS K 7317:2022 Plastics — Film and Sheeting — Determination of Coefficient of Friction
JIS L 0849 Testing Methods for Abrasion Resistance of Plastic Products
Parameters
| Parameter | Specification |
|---|---|
| Sliding speed | 5 mm/min – 6000 mm/min |
| Drive motor | AC servo motor |
| Drive mechanism | Rack and pinion |
| Sliding distance | 1 – 100 mm |
| Motion mode – single | Stops automatically after preset distance |
| Motion mode – reciprocating | Reciprocating motion at set distance (up to 9.999.999 cycles) |
| Measurement range | 0 – 1000 gf |
| Safety device | Overload protection |
| Operating environment | 0 – 50 °C, ≤85% RH, non-condensing |
| Power supply | AC 100 V, 50/60 Hz |
| Dimensions | W 475 × D 450 × H 475 mm (excluding protrusions) |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
High-Speed Reciprocating Friction and Wear Tester (Model 2M) | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The High-Speed Reciprocating Friction and Wear Tester (Model 2M) is designed for e... |
 |
Thermal Conductivity Tester(Light/Laser Flash Method) | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Transient Laser Flash Thermal Conductivity Tester is a high-precision instrument d... |
 |
Safety Helmet Molten Metal Splash Resistance Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Safety Helmet Molten Metal Splash Resistance Tester is a testing device design... |
 |
Multi-Functional Scratch Tester | Introduction Multi-Functional Scratch Testeris suitable for a variety of automotive interior materials, such as plastic, rubber, leather, fabric, ... |
 |
Five-Finger Scratch Tester | Get a quote： Whats/App: +86 181 0160 0864 The Five-Finger Scratch Tester is a precision instrument designed to assess the scratch resistance of a... |
Похожие товары
 |
ER4043 Silicon Aluminum Welding Wire | Продавец: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
