Carton drop tester for ASTM D5276 packaging impact testing
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The Carton Drop Tester meets the following international and national standards:
ISO 2248 – Packaging — Transport packages — Vertical impact test by dropping
GB/T 4857-5 – Packaging — Transport packages — Vertical impact test by dropping
ASTM D5276 – Standard test method for drop test of loaded containers by free fall
ISTA 1A, 2A, 3A – International Safe Transit Association protocols
ASTM 4619 – Standard test methods for packages
IEC 60068-2-31 – Environmental testing — Drop test
JIS Z0202 – Japanese Industrial Standard for package drop testing
EN 438-2.21 – High-pressure decorative laminates — Determination of impact resistance
Advantages
Accurate and repeatable testing with consistent results
Simulates real-world handling and shipping conditions
Identifies weak points in packaging design
Ensures adequate product protection
Supports compliance with international standards
Provides data for optimizing packaging strength and cost
Features
Adjustable drop height from 300 mm to 1500 mm
Free, reliable, and precise release mechanism
Capable of surface, edge, and corner drop tests
Rigid impact surface to ensure consistent test conditions
Motorized or pneumatic lifting mechanism
Digital controls and touch-screen interfaces (optional)
Safety features to protect operators and equipment
Sturdy frame supporting packages up to 70 kg
Technical Parameters
| Parameter | Specification |
|---|---|
| Drop height | 300–1500 mm (adjustable) |
| Maximum sample weight | 70 kg |
| Maximum sample size | 800 × 800 × 800 mm |
| Impact panel size | 1700 × 1200 × 14 mm |
| Motor power | 1.85 kW |
| Overall dimensions (L × W × H) | 1700 × 1200 × 2350 mm |
| Net weight | ~600 kg |
| Power supply | AC 380 V, 50 Hz |
| Control | Motorized and pneumatic lifting, wired remote control |
| Drop test modes | Surface, edge, corner |
Accessories
Adjustable sample holders
Remote control for motorized operation
Calibration reference standards (optional)
Safety guards and operator protection devices
Send product request
Other supplier products
 |
Scratch tester STD-KK03 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction With the continuous expansion of the use of plastic molding products, from th... |
 |
Catheter Sliding Performance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Catheter Sliding Performance Tester is professionally used for measuring the surface fr... |
 |
Martindale Abrasion And Pilling Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Martindale Abrasion & Pilling Tester To determine the abrasion and pillin... |
 |
Wire and cable smoke density tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The STD AOTSI-NBS smoke density test chamber, from NIST (NBS's predecessor), is widely used... |
 |
Export Leakage negative pressure tester for infusion device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument is compliant with the following standards, including relevant int... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
