Automotive Seat Foam BS5852 Fire Resistance Tester OEM Supplier
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
◆Stainless steel sample frame.
◆The dimension is 450 mm X300 mm X150mm and 450 mm X450 mm X300mm.
◆Heat-resistant wire mesh structure.
◆Stainless steel ignition tube.
◆Stainless steel test template.
◆Digital display, the accuracy of the numerical display is 0.01cm.
◆Standard wood, standard sponge and standard cigarettes.
Parameters
|
Test mode |
Automatic |
|
Test flow |
(45±2)m1/min |
|
Air pressure |
|
|
The length of air pipe |
Length 2.5~3mm, Inner diameter 7±1mm |
|
Timer |
0~999s |
|
Power supply |
AC 220V 50/60HZ |
|
Dimensions |
570x310x440mm(L x W x H) |
|
Weight |
20kg |
Test Procedures
This test must be conducted in a laboratory with standard airflow. The upholstery and filling materials are placed in a test apparatus to create a small sofa with a base and backrest measuring 90°. An ignition source is placed at the connection between the sofa's base and backrest. There are six different ignition sources, numbered 2-7. where 2-3 are gas combustion sources and 4-7 are wood combustion sources (higher numbers represent more intense ignition sources within the group).
During the gas combustion process, the smoldering time from the start should not exceed 30 minutes (60 minutes for wood combustion sources). If the test does not demonstrate charring in all directions beyond 100mm above the ignition source, the gas flame should be removed after 40 seconds (ignition source 2) or 70 seconds (ignition source 3). If there is no flame, it is permissible to continue for more than 120 seconds after the removal of the combustion tube. If there is no flame, it is permissible to continue for 10 minutes after the start of the test for ignition source 5 (13 minutes for ignition sources 6-7).
Send product request
Other supplier products
 |
ASTM D3574 compliant sponge compression hardness tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com This machine is used to measure the indentation hardness of porous elastic ma... |
 |
Spray Aerosol Ignition Distance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Conforms to UN Recommendations on the Transportation of Dangerous Good... |
 |
Melt Index Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Melt Index Tester (Melt Flow Rate Meter) is a precision instrument for evaluating the f... |
 |
Battery impact tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Battery Impact Tester is designed for safety performance evaluation of lithium-ion cell... |
 |
IEC / ISO Standard Halogen Acid Gas Tester for Cables | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The test apparatus is designed in accordance with the following international an... |
Same products
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
