Tobee® 100RV-SP Vertical Slurry Pump

• 
• 

Tobee® 100RV-SP Vertical Slurry Pumpis designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping the slurries with high abrasive, strong corrosion and high concentration liquids contain suspended solid particles.

Design Features:

• Bearing Assembly- The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
• Column Assembly- Completely fabricated from mild steel. The SPR model is elastomer covered.
• Casing- Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
• Impeller- Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
• Upper Strainer- Drop-in metal mesh, snap-on elastomer or polyurethane for SP and SPR pumps. Strainers fit in column openings.
• Lower Strainer- Bolted metal or polyurethane for SP, moulded snap-on elastomer for SPR.
• Discharge Pipe- Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected.
• Submerged Bearings- None

HEBEI TOBEE PUMP CO.,LIMITED
Email:
| |

Other supplier products

	Tobee® D078HS1D21 Stuffing Box for 4/3D-AH Slurry Pump	Tobee® D078HS1D21 Hi-seal Stuffing Boxis used for gland packing seal 4/3D-AH Slurry Pump. Tobee® Slurry Pump Stuffing Boxes are available ...
	Tobee® 12x10G-GH High Head Gravel Pump	Tobee® 12x10G-GH High Head Gravel Pumpis the world’s standard pump for dredge and gravel with high pressure applications. The 12x10 pump ...
	Tobee® SH005M Bearing Assembly of 14x12 AH Slurry Pump	Tobee® Bearing Assembly SH005Mis installed on14x12 AH Slurry Pumpsfor drive power unit, mainly composed of 13 parts: 1. Labyrinth, 2. End cover...
	Tobee® Mission 14x12x22 Pump	Tobee® Mission Magnum8x6x18, 12x10x23 and 14x12x22Blender Pumps are ideally suited for pumping high volumes of heavy slurries that are abrasive...
	Tobee® Slurry Pump Hi-seal Stuffing Box G078HS1D21	Tobee®Hi-seal Stuffing Box G078HS1D21is one of shaft seal parts in 10x8ST-AH Centrifugal Slurry Pump. It also can be installed on 12x10ST-AH Sl...

Same products

	WN(Q) Dredging Pump	Seller: Shijiazhuang Chongmu Fluid Machine Co., Ltd	The dredging pumpis a kind of mud pump developed by our company, which is used for dredging and h...
	IH Stainless Steel Centrifugal Pump	Seller: Shijiazhuang Chongmu Fluid Machine Co., Ltd	The IH type single-stage single-suction cantilever chemical centrifugal pump is an energy-saving ...
	Horizontal Multistage Pump	Seller: Shijiazhuang Chongmu Fluid Machine Co., Ltd	Looking for a reliable horizontal multistage pump manufacturerwith high-quality, durable, and exp...
	Diaphragm Pump DP03BL Series	Seller: PJM MECHANICAL CO.LTD	Diaphragm Pump DP03BL Series We specifically manufacture DP03BL diaphragm pump for use in medica...
	Gr300 Pneumatic Conveying Equipment/Air Vacuum Powder Automatic Conveying Equipment	Seller: Greentech International (Zhangqiu) Co., Ltd	Cast Iron Blow Through Airlock Valve Positive Rotary FeederRotary airlocks displace bulk solids f...