Tobee® Bearing Assembly SH005M for 14/12ST-AH Slurry Pump
Tobee® SH005M Bearing Assemblyfor 14/12ST-AH Slurry Pump, it also used for 12/10ST-AH Slurry Pump and 10/8ST-AH Slurry Pump.
Slurry Pump Bearing Assembly SH005Malso called rotor assembly which an important driven part of the 14x12 ST-AH slurry pump, It is a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. It is most important part for drive power unit. The bearing assembly is to connect the pump and motor as a complete pump working system. Its stability will directly affect pump operation and work-life.
It is mainly composed of 13 parts: 1. Labyrinth, 2. End cover, 3. Bearing, 4. Shaft, 5. Bearing housing, 6. Shim, 7. Grease cap, 8. Piston ring, 9. Labyrinth ring, 10. Bearing seal, 11. End cover set screw, 12. Shaft key, 13. Oil cup.
Bearing Assembly Design Features:
√ The main function of the bearing housing is to support the shaft and the bearing, ensure rotation on the axis, bear the force, and connect the working body to the power.
√ The bearings bear the meridional and axial forces to achieve effective rotation. The installation clearances of the bearings of different bearing assemblies in the slurry pump are different.
√ The shaft is the centerline of the pump rotation. The two ends are used to connect the impeller and the coupling, connect the active parts, and transfer the power to the working parts.
√ The bearing end cover is used to fix and locate the accurate position of the shaft, adjust the assembly clearance of the bearing, and bear the axial force of the pump.
√ The lubrication of the bearings in the slurry pump bearing assembly uses lithium-based grease as the grease.
√ The installation of the bearing assembly is very important. Improper installation can easily cause the failure of the slurry pump to run, or cause the slurry pump to run unstable, broken shaft, vibration, etc.
HEBEI TOBEE PUMP CO.,LIMITED
Email:
| |
Send product request
Other supplier products
 |
Tobee® 12x10G-GH High Head Gravel Pump | Tobee® 12x10G-GH High Head Gravel Pumpis the world’s standard pump for dredge and gravel with high pressure applications. The 12x10 pump ... |
 |
Tobee® 14x12G-G Gravel Pump | Tobee® 14x12G-G Gravel Pumpis designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be p... |
 |
Tobee® 16/14TU-AH Rubber Slurry Pump | Tobee® 16/14TU-AHR Rubber Lined Slurry Pumpis end-suction, split-case, centrifugal slurry pumps that have set the world standard for heavy duty... |
 |
Tobee® 4x3C-AH Slurry Pump | is engineered with the latest hydraulic and wear technologies to cope with the most severe corrosive and abrasive slurry applications, The 4x3C-AH ... |
 |
Tobee® 12x10F-G Gravel Pump | Tobee® 12x10F-GGravelPumpis a single stage, single casing, centrifugal horizontal pump driven by electric motor diesel engine. Large flow passa... |
Same products
 |
Submersible Motor and Pump | Seller: Tianjin Best Faith International Trade Co., Ltd. | QN/QM 6”8”10”12”submersible motor Ritz 1215/2-1218/2-1222/2 su... |
 |
China offer Plunger pump A10VS0-100DR-31R-PPA12N0 for Electric Company | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China offer Plunger pump A10VS0-100DR-31R-PPA12N0 for Electric CompanySelection of advanced tech... |
 |
40PV-TSP(R) Vertical Slurry Pump | Seller: Shijiazhuang Ruite Pump Co., Ltd | 40PV-TSP(R) Vertical Slurry Pump Product Description 40PV-TSP(R) Slurry Pump is ideal for a var... |
 |
12/10ST-TAHR Slurry Pump | Seller: Shijiazhuang Ruite Pump Co., Ltd | 12/10ST-TAHR Slurry Pump Product Description The feature frame and cover plates made out of gre... |
 |
China made Guide pin 0069/0070 for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China made Guide pin 0069/0070 for power stationThe company has a large flow, high discharge pre... |
