Tobee® Bearing Assembly SH005M for 14/12ST-AH Slurry Pump

• 
• 
• 

Tobee® SH005M Bearing Assemblyfor 14/12ST-AH Slurry Pump, it also used for 12/10ST-AH Slurry Pump and 10/8ST-AH Slurry Pump.

Slurry Pump Bearing Assembly SH005Malso called rotor assembly which an important driven part of the 14x12 ST-AH slurry pump, It is a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. It is most important part for drive power unit. The bearing assembly is to connect the pump and motor as a complete pump working system. Its stability will directly affect pump operation and work-life.

It is mainly composed of 13 parts: 1. Labyrinth, 2. End cover, 3. Bearing, 4. Shaft, 5. Bearing housing, 6. Shim, 7. Grease cap, 8. Piston ring, 9. Labyrinth ring, 10. Bearing seal, 11. End cover set screw, 12. Shaft key, 13. Oil cup.

Bearing Assembly Design Features:

√ The main function of the bearing housing is to support the shaft and the bearing, ensure rotation on the axis, bear the force, and connect the working body to the power.
√ The bearings bear the meridional and axial forces to achieve effective rotation. The installation clearances of the bearings of different bearing assemblies in the slurry pump are different.
√ The shaft is the centerline of the pump rotation. The two ends are used to connect the impeller and the coupling, connect the active parts, and transfer the power to the working parts.
√ The bearing end cover is used to fix and locate the accurate position of the shaft, adjust the assembly clearance of the bearing, and bear the axial force of the pump.
√ The lubrication of the bearings in the slurry pump bearing assembly uses lithium-based grease as the grease.
√ The installation of the bearing assembly is very important. Improper installation can easily cause the failure of the slurry pump to run, or cause the slurry pump to run unstable, broken shaft, vibration, etc.

HEBEI TOBEE PUMP CO.,LIMITED
Email:
| |

Другие товары поставщика

	Tobee® 8/6E-AHR Rubber lining pump Frame Plate Liner F6036R55	Tobee® 8/6E-AHR Rubber lined slurry pumps wet end parts,Cover Plate Liner F6018R55, Impeller F6147R55,Frame Plate Liner F6036R55, Throat Bush F...
	Tobee® 12/10ST-AHR Rubber Slurry Pump	Tobee®Rubber Lined Slurry Pumps Sealing Arrangement: Packing Seal As one of the most commonly used seals for rotating shafts, the packing seal...
	Tobee® 3/2C-AHR Rubber Slurry Pump	Tobee® 3/2C-AH Rubber Lined Slurry Pumpis designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance ...
	Tobee® S06210E62 Labyrinth for 12x10, 14x12 AH Slurry Pump	Tobee® S06210E62 Slurry Pump Labyrinthis a component of drive end parts can be suit for 12x10 and14x12 AH Slurry Pump, Tobee®can offer vari...
	Tobee® 10/8F-AHR Rubber Lined Slurry Pump	Tobee® 10/8F-AHR Rubber Lined Slurry Pumpadopts double-casing structure, It is more easy for use and maintenance. Wetted parts are made from na...

Похожие товары

	Погружный двигатель и насос	Продавец: Tianjin Best Faith International Trade Co., Ltd.	QN/QM 6 "8" 10 "12" подводный двигатель Погружный двигатель Ritz 1215/2-1218/2-1222/2 Погружный...
	China offer Plunger pump A10VS0-100DR-31R-PPA12N0 for Electric Company	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"China offer Plunger pump A10VS0-100DR-31R-PPA12N0 for Electric CompanySelection of advanced tech...
	40PV-TSP(R) Vertical Slurry Pump	Продавец: Shijiazhuang Ruite Pump Co., Ltd	40PV-TSP(R) Vertical Slurry Pump Product Description 40PV-TSP(R) Slurry Pump is ideal for a var...
	12/10ST-TAHR Slurry Pump	Продавец: Shijiazhuang Ruite Pump Co., Ltd	12/10ST-TAHR Slurry Pump Product Description The feature frame and cover plates made out of gre...
	China made Guide pin 0069/0070 for power station	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"China made Guide pin 0069/0070 for power stationThe company has a large flow, high discharge pre...