ANSI Cast Steel Swing Check Valve
Description:
1)Design and manufacture of product according to American state standard ANSI B16.34, American petroleum institute standard API6D.
2)Small opening pressure, the disc can be opened fully with a very small pressure differential.
3)Rocker and hinge pin use inside-set design, reduces outer leakage point.
4)The body and bonnet of class 1500~Class 900 check valve is connected with stud. And the body and bonnet of class 1500~class 2500 check valve pressure seat structure to make product bulk small, weight light, seal credible.
Basic design standards:
- Basic design: BS 1868, ANSI B16.34
- Face to face: ANSI B16.10
- Flanges: up to 24-inch ANSI B16.5 from 26-inch MSS SP44 ANSI B16.47
- Butt-weld ends: ANSI B16.25
- Testing: API 598
- Body materials: carbon, alloy and stainless steel, WCB, LCB, WC1, WC6, WC9, C5, C12, CF3, CF3M, CF8, CF8M and MONEL
- Pressure: ANSI class 150 to 2,500 (PN1.6 to 42MPa)
- Connection: flanged and butt-welded
- Cast steel globe valves 150LB-1500LB
- Size: 2 to 36 inches (50 to 900mm)
Send product request
Other supplier products
High Pressure Safety Valve | High Pressure Safety ValveDetailed Product Description: These safety valve are used for the equipment and pipeline of the steam, etc. medium what ... | |
Cast Steel Globe Valve | Brief description: Used to cut or connect the pipe media under nominal pressure Class, working temperature -29 to 800 degrees in industries includ... | |
API Tilting Disc Swing Type Check Valve | Tilting Disc Check Valves consist of a cylindrical housing, with a pivoted circular disc. The pivots are located just above the center of the disc,... | |
API 6D Stainless Steel Three Way Ball Valve | The three way ball valves have especially been designed to permit a 90°connection between two pipes of same bore. The special construction of... | |
ANSI Carbon Steel Globe Valve | Product Description The design of carbon steel globe valve is excellent in the world. In order to seal reliably, body employs ball type structure,... |
Same products
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... | |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... | |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... | |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... | |
Class 1500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ... |