Angle Check Valve
Size: 1/2inch -6 inch
Temperature of medium: Depends on body material
Medium: Water, Oil, Gas
Material: A105, A182 F316, CF8M, WCB etc
Pressure: 150LB ~ 1500LB
Angle Check Valve is designed for the roughest Industrial conditions. Because of its rugged construction, it is capable of handling pressures up to 3500 PSI (Higher pressure ratings are available.) This valve, unlike some competitors’ valves, is specifically designed for severe water hydraulic service.
Its angular design permits the check element to move completely clears of the flow stream in the open position-thus reducing pressure drop to a minimum.
Features
1)Positive pressure operation.
2)Instant action- non chattering, even under extremely low flow.
3)Operates efficiently at either high or low pressures.
4)Teflon seated.
5)Maximum temperature range -450 degrees F to + 500 degree F.
6)Hermetically sealed.
7)Operates in all positions.
Applications
1)Designed and engineered to withstand the rigorous duty of refrigeration and air conditioning systems.
2)Discharge Line duty- used to prevent refrigerant migration back through the compressor.
3)Heat pump duty - controls liquid line refrigerant.
4)Refrigeration and heat pump duty.
Send product request
Other supplier products
Back-flow Safety Valve | This valve is mounted on the liquidoid refluence pipeline of the pan pump's outlet of the liquefied petroleum gas station.when front pump pressure... | |
Dual Plate Lug Wafer Check Valve | Forged and Cast Steel Wafer Lug Check Valves: Dual Check Soft Seated or Metal-to-Metal Seated AllForged SteelWafer & Lug Check Valves are in... | |
Piston Pneumatic Control Valve | The utility model discloses a Piston Pneumatic Control Valve which is characterized in that a cylinder is provided with a working air chamber and a... | |
Forged Steel Y-Pattern Globe Valve | Description: Y-Pattern Globe valves are available in three bonnet designs. 1) Bolted Bonnet, with male-female joint, spiral wound gasket, made in F... | |
Carbon Steel Y-Pattern Globe Valve | Description: Y-Pattern Globe valves are available in three bonnet designs. 1) Bolted Bonnet, with male-female joint, spiral wound gasket, made in F... |
Same products
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан | |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... | |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... | |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... | |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |