Automatic Mapping Cave Detector PQWT-KD300
PQWT-KD series automatic mapping cave detector is based on the earth’s electromagnetic field source, based on the difference in the conductivity of different underground geological structures, and by studying the variation law of the electric field components at different frequencies to study the gelolgical structure and changes, to search the underground geological areas such as underground mined area,loose soil, tunnels, and ants, and has a very good detection effect on engineering geology, archeology, and disasters.
Product Description
Parts
Test Light
System Running Light
Main Switch
System Reset Button
MN Port
Memory Card
USB Port
LCD Touch Screen
Battery Holder
Copper Electrode
Cable
MN Plug
Alloy Electrode Bar
Advantages
Wiring Method
(M N are the electrode, O is the measurement point, Point distance is 1-5m)
The data collected by the instrument each time is the midpoint data between the two electrodes.The electrode distance is 10m, and the distance between points is generally 1-5m (the standard is 1m).Electrode spacing and point spacing must keep the same distance for one measuring line.As the left picture shows.
Specification
|
Model No. |
Measurement Depth |
Units of measurement |
Working Temperature |
LCD |
Measurement Method |
Power Supply |
|
PQWT-KD300 |
300 meters |
△ V '' (mV) |
-10°~+50° |
7-inch LCD Screen |
Three Frequency Profile Survey |
#26650 4000mAh |
|
2*Rechargeable lithium battery |
Do you want to know more about the inverted hammer? ABT Drilling Equipment Co., Ltd. mainly provides drilling rig equipmentto help you solve the problem of drilling at high efficiency and low cost.Always feel free to inquiry!
Send product request
Other supplier products
 |
Diamond Reaming Shell | Specification Specification of Diamond Reaming Shell Category Bit Size (mm) PDC reaming shell features Double-tube reaming shell P56、... |
 |
SP Series High Pressure Drill Bit | Our drill bits are interchangeable with various products manufactured by Atlas Copco. Specification Specification of SP Series High Pressure Drill ... |
 |
Eccentric Overburden Drilling Equipment | Eccentric drillingis used for casing following drilling while drilling in soil layer. Product DescriptionSpecification Operating Steps of Eccentric... |
 |
NUMA Series High Pressure Drill Bit | Our drill bits are interchangeable with various products manufactured by Atlas Copco. Specification Specification of NUMA Series High Pressure Dr... |
|
|
Automatic Mapping Cave Detector PQWT-KD300 | PQWT-KD series automatic mapping cave detector is based on the earth’s electromagnetic field source, based on the difference in the conductiv... |
Same products
 |
Hole Opener Bit | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | Hole Opener Drill Bit The following pipe bit is mainly used to drive iron pipe to drill together ... |
 |
Hand Hammer Drill | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | The hand hammer drill machinehole diameter is 19 ~ 42mm, and the hole depth is up to 5m, usually ... |
 |
Hammer | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | ABT supplies a series of DTH hammers for sale. All DTH hammer drills features high energy-efficie... |
|
|
Eccentric Overburden Drilling Equipment | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | Eccentric drillingis used for casing following drilling while drilling in soil layer. Product Des... |
|
|
Diamond Reaming Shell | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | Specification Specification of Diamond Reaming Shell Category Bit Size (mm) PDC reaming s... |
