Automatic Mapping Water Detector ANBIT-TC500
ANBIT-TC series automaticpqwt tc 500 water detectoris based on the Earth’s electromagnetic field as the field source, based on the difference in the conductivity of different underground geological structures, and by studying the variation law of the electric field components at different frequencies to study the geological structure and changes, to find groundwater resources by scientific method.Changes in geological structure are displayed in real-time through multiple curves.Automatic form mapping geological profile by one key operate easily, get rid of complicated computer graphics.The site can quickly understand the geological structure through the automatic mapping curve and profile, and analyze specific information such as aquifers,fractures, faults, and karst caves.The instrument is widely used in the rapid analysis of geological structure changes in different terrains such as plains,hills,mountains, plateaus, and basins to determine well locations, aquifers, and aquifer depth.
Product Description
The Parts of Automatic Mapping Water Detector PQWT TC500
Main switch
Power light
Test light
Systerm reset button
MNport
Memory care
USB port
LCD touch screen
Battery holder
Copper electrode
Alloy electrode bar
MN Plug
Electrode cable
The Advantages of Automatic Mapping Water Detector PQWT-TC500
Apply to multiple and complex terrain exploration
The instrument can automatic mapping and get result on site
Profile map shows aquifer and depth
Expert remote assistance to analysis well location
Inexperienced people can learn the operation in 5 minutes
The Wiring Method of Automatic Mapping Water Detector PQWT-TC500
(M N are the electrode, O is the measurement point, Point distance is 1-5m)
The data collected by the instrument each time is the midpoint data between the two electrodes. The electrode distance is 10m, and the distance between points is generally 1-5m (the standard is 1m). Electrode spacing and point spacing must keep the same distance for one measuring line. As the left picture shows.
PQWT Water Detector Manual：
ANBIT provides a comprehensive selection of measuring equipments and tools, and a complete set of water well drilling equipments which determining the best drilling position and water depth. KD500 automatic mapping water detector offer a precision detecting service for water well, reduce costs, and handle all kinds of complex terrain.
Specification
Specification of Automatic Mapping Water Detector ANBIT-TC500
|
Model No. |
Depth |
Frequency |
Channel |
System |
Units of measurement |
Measurement Range |
Power Supply |
|
PQWT-TC500 |
500 meters |
Single, Triple, 56 |
8 |
PQWT |
△Vs(mV) |
0mV-2000mV |
#26650 4000mAh |
|
2*Rechargeable lithium battery |
Anbit Drilling Equipment Co., Ltd. is a well drilling equipment manufacturersmainly provides drill bit, drilling tools, hammer machine, cheap air compressors, ABT Drilling Equipment, and etc, want to know more? Please contact us.
Send product request
Other supplier products
 |
Skid-Mounted Diesel Air Compressor | The skid mounted diesel air compressorhas a skid-mounted base, which is convenient to connect with other transport equipment. It is mainly suitable... |
 |
Automatic Mapping Water Detector PQWT-TC900 | PQWT-TC series automatic mapping water detector is based on the Earth’s electromagnetic field as the field source, based on the difference in... |
 |
Eccentric Overburden Drilling Equipment | Eccentric drillingis used for casing following drilling while drilling in soil layer. Product DescriptionSpecification Operating Steps of Eccentric... |
 |
Reverse Circulation Drill Bit | The reverse circulation drill bitis used in combination with the reverse circulation impactor and is driven by high-pressure air to obtain large ro... |
 |
Big Taps | Accidents occasionally occur during the construction of the submersible drilling, when the bit falls into the hole, which not only damages the tool... |
Same products
 |
Hole Opener Bit | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | Hole Opener Drill Bit The following pipe bit is mainly used to drive iron pipe to drill together ... |
 |
Hand Hammer Drill | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | The hand hammer drill machinehole diameter is 19 ~ 42mm, and the hole depth is up to 5m, usually ... |
 |
Hammer | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | ABT supplies a series of DTH hammers for sale. All DTH hammer drills features high energy-efficie... |
|
|
Eccentric Overburden Drilling Equipment | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | Eccentric drillingis used for casing following drilling while drilling in soil layer. Product Des... |
 |
Diamond Reaming Shell | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | Specification Specification of Diamond Reaming Shell Category Bit Size (mm) PDC reaming s... |
