High hardness tungsten carbide guide wheel guide roller

• 
• 
• 
• 

1. For the rolling mill, guide rollers (also called ring rollers, guide wheel) is an indispensable part of wires export in the wires rolling process, it must be accorded with the requirements of high rigidity, good wear resistance (the service life is matched with the high-quality bearing), good thermal conductivity, a certain of red hardness, especially the high speed wires rolling (rolling speed is among 80-120m/s). In the current market, most of the guide wheels are manufactured by steel materials (especially in the domestic market), which have the weak wear resistance, short service life and high frequency replacement, so the scale benefit of wire materials is restricted. however, steel-bonded cemented carbide has the obvious strengths on this aspect.
   
   

   Lighter than Tungsten carbide roller by 55%, Lighter than tool steel than 20%, so the guide roller accelerates from standstill to 35,000 rpm, without damaging the bearing.Very low coefficient of friction and self-lubricating properties, so the working portion of the guide roller is less worn, and the production can be greatly increasedThe coefficient of thermal expansion is close to that of the bearing steel. When the quenching is hot, the bearing will not get stuck. The thermal expansion coefficients of titanium carbide cemented carbide and tungsten carbide hard alloy are very different from those of steel. Therefore, the steel bonded carbide guide roller is more advantageous for bearing anti-seize ability than the two cemented carbide guide rolls.The micro structure is titanium carbide and high chromium tool steel, which has good thermal fatigue resistance.Anti-oxidation, less magnetic, non-stick steel.Annealing hardness is only HRC45-48, easy to process, after quenching, only alittle fine grinding can be processed into finished products, the processing cost is low, so the price is also low. this is also one of the main reasons why titanium carbide guide rolls are superior to tungsten carbide guide rollers.Hardness HRC62-67, good wear resistance. the service life is 8-10 times that of high speed steel.Absolutely dense, the pores are almost zero, so it will not break when used and can be reused.Compared with similar foreign products, the price of Miller MT10 is lower, which greatly saves the production cost of customers.

Other supplier products

	Titanium carbide guide wheels for industrial transmission	Hard alloy titanium carbide guide wheels exhibit excellent thermal shock resistance. When subjected to rapid temperature changes—from room te...
	Laser resharpening treatment of carbide titanium carbide guide wheel	Carbide titanium carbide guide wheel is the key guiding parts in the production of wire and pipe, which is made of high purity titanium carbide and...
	Titanium carbide hard alloy guide wheel with strong load-bearing capacity	The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring...
	Titanium carbide rods are available for small-batch purchase	Titanium carbide round rods made of cemented carbide exhibit excellent electrical conductivity, making them suitable for use as electrodes in elect...
	Titanium carbide cemented carbide rod with excellent cutting performance	titanium carbide round bar is a high-performance bar made by powder metallurgy process, with titanium carbide as the main hard phase and cobalt or ...

Same products

	Aftermarket Excavator Control Valves	Seller: Colorful tower machinery co ,. ltd	Aftermarket Excavator Control Valves Our are precision-engineered hydraulic components desig...
	TILTING CHECK VALVE	Seller: HEBEI LEFLOW IMPORT AND EXPORT CO., LTD.	TILTING CHECK VALVE Valve Size:DN200-DN1200Pressure Rating: PN10/16/25.Design & Manufacture:...
	China Gate valve	Seller: Yuanda Valve Group Co.,Ltd.	China Gate valve China Gate valve A is a type of valve that uses a gate or wedge-shaped dis...
	6 inch check valve pvc	Seller: Yuanda Valve Group Co.,Ltd.	6 inch check valve pvc In recent years, Yuanda has witnessed a rising awareness in enginee...
	Gate Valve Vs. Ball Valve	Seller: Yuanda Valve Group Co.,Ltd.	Gate Valve Vs. Ball Valve Gate valves and ball valves are both types of valves that are used to ...