Bernard control panel GAMX-2007
♦Input signal is 4~20mA or Passive switch signal(without external contact withthe power signal).output signal is 4~20mA, Complete isolation between the inputchannel and output channel.
♦When the input signal for the passive contact signal(see picture6terminal, 34, 35, 36, 39), Which can be controlled electric remote control type of theactuator.
♦ There are manual and automatic switch TS on circuit board; when is onmanual position, Turning PI potentiometer knob can be operated actuator running.
♦Logic signal type setting: Jump line RT used to determine,
(1)When on RT position, when loss input signal, the actuator hold original position
(2)When on RT position, when loss input signal, the actuator closed
(3)When on RT position, when loss input signal, the actuator fullyopen
♦Change in the direction of running, running direction determined by key switchIT1&IT2
(1)Actuator leave factory run by a clockwise direction. key switch IT1&IT2 keeporiginal position(Switch in the free state), 4mA is valveclosed, 20mA is valveopen.
(2)Press the key switch IT1&IT2 at the same time(Switches are locked in the press);Actuator counterclockwiser running, 4mA is valveopen, 20mA is valveclosed.Full adjustment:P2 is full adjustment;
♦Dead zone adjustment:P3 is dead zone adjusted potentiometer;
♦Adjustment range is0.3~~3%, it has been set well when leave factory. It will be adjusted when need again.
♦Circuit board point A and point D reference point adjustment. Potential of pointA and point D has been adjusted well when leave the factory. The user do not adjust, general condition, when input signal is 4mA, andbe achieved by adjusting P4potentiometer that make potential of point A is 5VDC, the user don’t adjust P5
♦The LED indicator on the circuit board:
Ll(green) the actuator open direction;
L2(red) actuator closed;
L3 (red) Edge torque switch instructions;
L4(yellow) Singleproduct dynamic production instructions(moment shining)
Send product request
Other supplier products
 |
JINDA control panel JDIDL-AN | l. Operation on control panel 2. Set the dial switch l on panel to "Manual", "A" would be indicated for nixie tube status indicated, and set the di... |
 |
120NM dzw modulating electric actuator DZW120+WK2 Z120 | Overview DZWmulti-turn smallelectric valve actuator is a new product that extends from small-diameter gate valve and globe valve. It changed t... |
 |
High performance Electric Lug Butterfly Valve Mini Motorized Valve With Actuator | Under an ISO 9001 Quality assurance Program, it assures each valve we product meets or exceeds your application requirements. High performance but... |
 |
SD electric ball valve | SD electric ball valve used for cutting off or connecting mediuminside the pipeline and can be also used for adjusting and controlling the fluid. I... |
 |
Exquisite Small Type Electric Ball Valve Actuator | Electric flanged ball valve has the advantage of powerful operating function, small volume, light weight, beautiful outlook, wear-resisting, simple... |
Same products
 |
API Standard Flange Swing Check Valve | Seller: Wenzhou Chenyu Valve Co., Ltd | Flange Swing Check Valveis a specific and widely used type of Check Valve. Its primary function i... |
 |
Triple Eccentric Flange Butterfly Valve | Seller: Wenzhou Chenyu Valve Co., Ltd | The triple eccentric flange butterfly valvehas three eccentricities. The first eccentric shaft de... |
 |
Casting Trunnion Ball Valve | Seller: Wenzhou Chenyu Valve Co., Ltd | Cast steel trunnion-mounted ball valvesfeature a split body design and can be customized or autom... |
 |
Aftermarket Excavator Control Valves | Seller: Colorful tower machinery co ,. ltd | Aftermarket Excavator Control Valves Our are precision-engineered hydraulic components desig... |
 |
TILTING CHECK VALVE | Seller: HEBEI LEFLOW IMPORT AND EXPORT CO., LTD. | TILTING CHECK VALVE Valve Size:DN200-DN1200Pressure Rating: PN10/16/25.Design & Manufacture:... |
