Loaded Board Test Probe CPM-4

• 

The loaded board test probe is applied for examining the loaded circuit boards. The common testing methods for loaded boards are ICT (In-Circuit Test) and FCT (Function Test). Both methods examine the performance of components and circuit connections to detect the defective components during production. ICT and FCT ensure the loaded circuit boards’ normal operation through assessing connection performance of the testing components at the replicated environment of the future application field and controlling the electrical performance of the components to assess the comprehensive connection of the circuit.

Specification:

1. Recommended min. center: 3.0(.118")
2. Full travel: 10(0.393" )
3. Current rating:8A
4. Contact resistance:50mΩ

Materials and finishes:

1. Plunger: Brass, Au plated
2. Barrel: Brass, Ni plated
3. Spring: Stainless

Other supplier products

	Conductive Rubbers	Description It has greater electrical and thermal conductivity, heat and cold resistance than electrically conductive synthetic rubbers.
	Loaded Board Test Probe CPM-4	The loaded board test probe is applied for examining the loaded circuit boards. The common testing methods for loaded boards are ICT (In-Circuit Te...
	High-Frequency Test Probe RF-138G	As a high-frequency spring test probe manufacturer, Chunglai CPM has been involved in the industrial field of spring loaded test probes for more th...
	Bare Board Test Probe CPM-2	The bare board test probe is used for bare board (blank version) testing. To check the operation of a PCB circuit, the test probe is generally appl...
	Bare Board Test Probe CPM-0	The bare board test probe is used for bare board (blank version) testing. To check the operation of a PCB circuit, the test probe is generally appl...

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...