Gravel Impact Testing Machine

• 

Standards:

SAE J400.VDA 621427.ISO 20567-1.ASTM D3170.GMW14668-3.4.9.Peugeot/Citroen D241312.Chrysler 463PB-52-01 、Chrysler 463PB-39-01.Mazda MES MN 601C ，Toyota，Nissan，Ford BI 157-04、Ford BI 157-05.

Applications:

Product Information:

Introduction

The test machine mainly simulates the actual driving condition of the vehicle, and the individual parts of the vehicle body are often impacted by heavy objects such as sliding material and pavement gravels. Thus, the products are damaged. The product damage degree is determined by injection Angle, injection pressure, number of injection, airflow speed, the specification and quality of steel shot or gravel, impact duration and test instrument.

Work Principles

A certain weight of gravel is bounced into the feeder by vibration. Due to the vacuum formed by the high speed air flow in the lower part of the feeder, the collision medium is sucked into the ejection gun assembly, and then is shot into the test sample by the jet stream. After the medium hit the test target, the medium falls into the gravel collecting box. The test machine causes a large number of steel balls or rubble with sharp edges to hit the sample surface in a short time. The whole experiment is carried out under a controlled temperature. After the impact is finished, the loose coating is removed with adhesive tape to reveal the residual stone strike marks on the sample, which can be used to judge the performance of the resistance to stone impact by analyzing the damage degree of the sample.

Features

·The ejection nozzle is free and fast, complying with standards such as VDA and SAE.

·The touch screen setting makes the test process more convenient and concise.

·Plate type test sample angle can meet the requirements of 0-90 ° settings at 15 ° intervals.

·Continuous or intermittent operation can perform multiple tests in a short time.

·Feed rate is adjusted by electromagnetic vibration feeder.

·The large volume compressed air storage tank keep pressure and flow constant while controlling the pressure through control valve in the ejection nozzle.

·It is equipped with various safety protection measures: safety power-off device, air pressure safety protection device, which conforms to European CE and EMC certification.

Assessment Method

1)Stick the adhesive tape to the surface of the sample coating, apply uniform force for tight attachment to the surface of the sample and avoid creating air bubbles. Then pull up the tape.

2)The tape is attached to the surface of the sample coating, and it is applied to the surface of the sample with uniform force to avoid the bubbling. Then pull up the tape from the opposite direction of 1).

3)Repeat the steps of 1) and 2) until the damaged coating completely comes off.

4)At this pint, you can accurately count the damage points for assessment.

5)Cover the transparent grille on the sample, count the number of coating damage points (except the impact marks) in 101.6mm x 101.6 mm area and confirm the size of the damage pints.

Technical Parameters

Other supplier products

	Taber Abrasion Tester (Double-Head)	Standards: 1. DIN 53754 Testing of plastics; determination of abrasion, abrasive disk method 2. DIN 53109 Testing of paper and board; determinat...
	Closed - Space Tester for Aerosol Sprays	Product Features 1. It adopts an embedded processor and the Windows CE operating system. 2. With an 8 - inch liquid - crystal touch screen, it can...
	Digital Autoburst Strength Tester	Standards: ASTM D3786, ERT 80-4-20, GB/T 7742.1, BS EN ISO 13938-1, BS 3424-6-B, ISO 3303-B, ISO 2758, ISO 3303.2, ISO 3689, JIS L1018,L1093, IW...
	Automatic open flash point tester	Product Introduction: The instrument can automatically test the flash point and ignition point of petroleum products （the ignition point of oil ex...
	Dry microbial penetration tester ISO 22612 YY/T 0506.5	Dry microbial penetration resistance tester DMPRT is to assess the penetration resistance through barrier materials of bacteria-carrying particles....

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...