Mask Air Tightness Tester
Product Information:
The Mask Air Tightness Tester is a portable device designed to detect the service performance and applicability of protective masks, and provide leaks and service performance testing for specified nuclear, biological and chemical defense (NBCD) / chemical, biological and radiation defense (CBR-D) masks and components without the need for the operator to wear a mask. PMLT can be set for timing by minutes, fully integrated in a rigid transportable box.
Through a universal clamping assembly, inflated mask seals and fixture adapters, the PMLT Mask Leakage Tester can virtually measure any type of gas masks in the world. Lightweight plastic heads are available in 2 sizes and are easily interchangeable with different sizes of masks. PMLT protective mask leak tester utilizes advanced transistor circuit and menu-driven touch pad to provide alphanumeric display.
PortaCount Respirator Fit Tester Applications:
Overall Mask Leakage Test : Mask leakage is measured while the mask is challenged with an aerosol, with or without a plugged filter canister attached.
Leakage Isolation Test: Leaks normally invisible to the naked eye are easily isolated so that repair/replacement decisions can be made.
Wind exhaust Valve Test: In the wind exhaust valve test, suspended particles as a function in the mask test and isolation detect the airflow leakage under strictly controlled conditions.
Drink Tube Flow Test: Tube blockage can be measured.
Drink Tube Valve Leakage Test: The drink tube valve is tested for leakage under controlled pressure.
Technical Parameters：
| Items | Parameters |
| Size | 32” (L) x 22.5” (W) x 20” (H) while packed |
| Weight | ~90 lbs/41 kg packed, ~60 total unpacked |
| Power Supply | 100 to 250 Volts AC, 50/60 Hz |
| Aerosol Reagent | Poly-dispersed oil (PAO-4) |
| Aerosol Detection | Near-forward light scattering photometer |
| Detection Range | 0.0005 to 100% |
| Fit Factor Limit | 200,000 |
| Data Output | RS-232 serial port |
| Patents | 6,435,009 / 6,848297 / 7,140,234 / 7,343,783 |
Send product request
Other supplier products
 |
Helmets Acceleration Impact & Penetration Tester | Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-1 (Industrial Safety Helmets – Impact Absorp... |
 |
Adiabatic Self Accelerating Decomposition Temperature Tester | Standards: This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 28.4.2 Test H.2: Insula... |
 |
AATCC Accelerotor | AATCC Accelerotor - Textile and Apparel - standard Standards: ATCC 93,M&S P26,M&S P53,NEXT 31 Applications: AATCC Accelerotor, to... |
 |
Salt Spray Tester | The Salt Spray Tester is used to create and maintain the salt spray (fog) test environment, and test the anti-corrosion quality of all the material... |
 |
Pilling assessment viewer | Universal pilling pilling viewer/Pilling Pilling Rating tester By comparing the sample to the standard card under the specified light source to obt... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
