.

Thermal cycle wet freezing testing machine

Thermal cycle wet freezing testing machine
  • Thermal cycle wet freezing testing machine
Produced by: Standard International Group (HK) Limited

All supplier products
Send product request

Standard

  • IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
  • UL 1073: Standard for Safety for Enclosures for Electrical Equipment
  • ISO 16750-4: Road Vehicles – Environmental Conditions and Testing for Electrical and Electronic Equipment
  • CE Certification(Conformité Européenne)

Product Advantages

  1. Extreme Environmental Simulation
    • -40°C to +85°C Range: Replicates Arctic cold to desert heat in a single chamber.
    • 98% RH Humidity Control: Tests condensation resistance for marine/tropical applications.
  2. Ultra-Stable Performance
    • ±1°C Temperature Stability: Ensures consistent testing across 1,000+ cycles.
    • ≤±2°C Uniformity: Patented airflow design eliminates hot/cold spots.
  3. Rapid Transient Response
    • IEC 61215-Compliant Ramps: 10°C/min heating, 7°C/min cooling (customizable).
    • Auto-Tuning PID: Adapts to payload changes in real-time.
  4. Energy Efficiency
    • 40% Lower Power Consumption: Advanced insulation and heat recovery systems.
    • ECO Mode: Auto-powers down during stabilization phases.
  5. Safety First
    • Dual Overload Protection: Thermal cutout and current-limiting circuit breaker.
    • Door Interlock System: Prevents accidental chamber access during testing.

Product Features

  • Dual-Chamber Design: Isolated wet/dry zones for simultaneous multi-condition testing.
  • 10” Touchscreen HMI: Preloaded IEC/UL test profiles with customizable hold times.
  • Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts.
  • Self-Diagnostics: Real-time sensor health checks and error logging.
  • Glovebox Compatibility: Oxygen/moisture control for sensitive electronics testing.

Technical Parameters

ParameterSpecification
Temperature Range -40°C to +85°C (operational)
Temperature Fluctuation ≤±1°C
Temperature Deviation ≤±1°C (at steady state)
Temperature Uniformity ≤±2°C (empty chamber)
Heating Rate 10°C/min (typical, configurable)
Cooling Rate 7°C/min (typical, configurable)
Humidity Range 30%–98% RH (non-condensing)
Humidity Deviation ±3% FS (at 85% RH ±2%, 90% RH ±2%)
Chamber Volume 500L (standard), expandable to 1,500L
Power Supply 380V/415V 3-phase, 50/60Hz
Dimensions 1,200mm (W) × 1,800mm (D) × 2,000mm (H)
Weight 800 kg (net) / 1,200 kg (gross)

Accessories Included

  1. Testing Kit:
    • 4x universal sample racks (adjustable for batteries/PV modules/PCBAs).
    • 10x humidity sensor calibration capsules.
  2. Software Suite:
    • License key forEnviroTest Pro(Windows/Linux).
    • 1-year free access to cloud-based test report generator.
  3. Calibration & Safety:
    • NIST-traceable temperature/humidity logger.
    • Emergency eyewash station (portable).
  4. Maintenance Kit:
    • Spare heating elements and refrigerant filters.
    • Chamber cleaning solution (non-corrosive).
  5. Documentation:
    • Multilingual quick-start guide (printed + digital).
    • Compliance certificates for IEC/UL/ISO standards.

Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Coatings Shear Fatigue Tester
Coatings Shear Fatigue Tester Standard YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings on metallic substrates, including load ratios, freque...
Comprehensive oil filter tester
 Comprehensive oil filter tester Standards: 1、Executive standard: jb/t 5088.2-2008 internal combustion engine spin-on oil filter; 2、Test object: internal combustion engine oil fi...
Static Honest Meter
 Static Honest Meter Standards: GB/T 12703.1 FZ/T 01042 JIS L1094 Applications: Static Honest Meter is a measuring instrument for attenuation of static electri...
Strength Tester for Safety Helmet Chin - strap
 Strength Tester for Safety Helmet Chin - strap Strength Tester for Safety Helmet Chin - strap - Other test instrument - standard Standards: GB/T 2812-2006, GB/T 2812-XXXX, GB/2811-2019 ...
Intramedullary Nails Internal - fixation Pull - out Force Tester
 Intramedullary Nails Internal - fixation Pull - out Force Tester Standard ASTM F543: Standard specification for metallic medical bone screws (dynamic loading protocols). ISO 12172: Implants for surgery—...
All supplier products

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 Seller: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
 Surface Performance Tester STD-FB4 - A Seller: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A Seller: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH Seller: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S Seller: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...