.

Thermal cycle wet freezing testing machine

Thermal cycle wet freezing testing machine
  • Thermal cycle wet freezing testing machine
Производитель: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd

Все товары поставщика
Отправить запрос, связаться с поставщиком

Standard

  • IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
  • UL 1073: Standard for Safety for Enclosures for Electrical Equipment
  • ISO 16750-4: Road Vehicles – Environmental Conditions and Testing for Electrical and Electronic Equipment
  • CE Certification(Conformité Européenne)

Product Advantages

  1. Extreme Environmental Simulation
    • -40°C to +85°C Range: Replicates Arctic cold to desert heat in a single chamber.
    • 98% RH Humidity Control: Tests condensation resistance for marine/tropical applications.
  2. Ultra-Stable Performance
    • ±1°C Temperature Stability: Ensures consistent testing across 1,000+ cycles.
    • ≤±2°C Uniformity: Patented airflow design eliminates hot/cold spots.
  3. Rapid Transient Response
    • IEC 61215-Compliant Ramps: 10°C/min heating, 7°C/min cooling (customizable).
    • Auto-Tuning PID: Adapts to payload changes in real-time.
  4. Energy Efficiency
    • 40% Lower Power Consumption: Advanced insulation and heat recovery systems.
    • ECO Mode: Auto-powers down during stabilization phases.
  5. Safety First
    • Dual Overload Protection: Thermal cutout and current-limiting circuit breaker.
    • Door Interlock System: Prevents accidental chamber access during testing.

Product Features

  • Dual-Chamber Design: Isolated wet/dry zones for simultaneous multi-condition testing.
  • 10” Touchscreen HMI: Preloaded IEC/UL test profiles with customizable hold times.
  • Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts.
  • Self-Diagnostics: Real-time sensor health checks and error logging.
  • Glovebox Compatibility: Oxygen/moisture control for sensitive electronics testing.

Technical Parameters

ParameterSpecification
Temperature Range -40°C to +85°C (operational)
Temperature Fluctuation ≤±1°C
Temperature Deviation ≤±1°C (at steady state)
Temperature Uniformity ≤±2°C (empty chamber)
Heating Rate 10°C/min (typical, configurable)
Cooling Rate 7°C/min (typical, configurable)
Humidity Range 30%–98% RH (non-condensing)
Humidity Deviation ±3% FS (at 85% RH ±2%, 90% RH ±2%)
Chamber Volume 500L (standard), expandable to 1,500L
Power Supply 380V/415V 3-phase, 50/60Hz
Dimensions 1,200mm (W) × 1,800mm (D) × 2,000mm (H)
Weight 800 kg (net) / 1,200 kg (gross)

Accessories Included

  1. Testing Kit:
    • 4x universal sample racks (adjustable for batteries/PV modules/PCBAs).
    • 10x humidity sensor calibration capsules.
  2. Software Suite:
    • License key forEnviroTest Pro(Windows/Linux).
    • 1-year free access to cloud-based test report generator.
  3. Calibration & Safety:
    • NIST-traceable temperature/humidity logger.
    • Emergency eyewash station (portable).
  4. Maintenance Kit:
    • Spare heating elements and refrigerant filters.
    • Chamber cleaning solution (non-corrosive).
  5. Documentation:
    • Multilingual quick-start guide (printed + digital).
    • Compliance certificates for IEC/UL/ISO standards.

Отправить запрос, связаться с поставщиком

Кому: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Footwear Cold Insulation Tester
 Footwear Cold Insulation Tester Product Introduction: Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other tes...
HapLog Finger Tactile Sensor
 HapLog Finger Tactile Sensor Content HapLog sensor is a “sensor that measures natural finger operations” with a built-in contact force sensor and a 3-axis accele...
Compression Fatigue Testing Machine for Intervertebral Fusion Cages
 Compression Fatigue Testing Machine for Intervertebral Fusion Cages Standard YY/T 0959-2014 (China): Specifies compression fatigue testing protocols for intervertebral fusion devices, including load ratios, frequ...
Lateral Rigidity Tester for Safety Helmets
 Lateral Rigidity Tester for Safety Helmets Standard GB 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-2 (Industrial Safety Helmets – Lateral Deforma...
Spinal Internal Fixation System Component Testing Machine
 Spinal Internal Fixation System Component Testing Machine Standard YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixation components, including screws, plates, rods, and conn...
Все товары поставщика

Похожие товары

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 Продавец: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
 Surface Performance Tester STD-FB4 - A Продавец: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A Продавец: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH Продавец: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S Продавец: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...