.

Rupture strength tester

Standard

  • IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing
  • UL 61730: Safety Standard for Photovoltaic Modules
  • CE Certification(Conformité Européenne)

Product Advantages

  1. Ultra-Wide Pressure Range
    • 250–5,600 kPa (36–812 psi): Tests glass, backsheets, and encapsulants from thin-film to dual-glass modules.
    • 0.01 kg/cm² Resolution: Captures micro-fractures before catastrophic failure.
  2. Precision Engineering
    • 5 kg/cm² Adjustable Holding Pressure: Simulates wind/snow loads per IEC 61730-2.
    • Multi-Unit Display: Switches between kPa, psi, and kg/cm² for global compliance.
  3. Safety First
    • Dual Overpressure Protection: Mechanical relief valve + electronic cutoff at 5,600 kPa.
    • Explosion-Proof Chamber: Reinforced acrylic window for safe failure observation.
  4. User-Centric Design
    • 7” Touchscreen HMI: Preloaded IEC/UL test sequences with auto-hold functions.
    • Voice-Guided Setup: Step-by-step audio prompts for operators.
  5. Data Integrity
    • Built-In Printer: Generates ISO 17025-compliant test certificates on-site.
    • SD Card Logging: Exports pressure-time curves for R&D analysis.

Product Features

  • Quick-Change Fixtures: Adapts to 2–20 mm module thicknesses.
  • Dynamic Pressure Control: Ramp rates from 1 kPa/s to 100 kPa/s.
  • Self-Calibrating System: Auto-tare and linearity checks before each test.
  • Rust-Resistant Frame: 304 stainless steel construction with epoxy coating.
  • Portable Design: 60 kg weight with integrated handles for lab-to-line mobility.

Technical Parameters

ParameterSpecification
Pressure Range 250–5,600 kPa (36–812 psi)
Resolution 0.01 kg/cm² (1.42 psi)
Holding Pressure 5 kg/cm² (71 psi) adjustable
Air Source 6 kg/cm² (87 psi) min (customer-provided)
Control Accuracy ±1% FS (full scale)
Power Supply 220V AC, 50/60Hz (single-phase)
Dimensions 560mm (W) × 470mm (D) × 550mm (H)
Weight 60 kg (net)

Accessories Included

  1. Testing Kit:
    • 1x Specialized Clamping Fixture (for 2–20 mm modules).
    • 2x High-Temperature Rubber Membranes (300°C rated).
    • 5x Aluminum Foil Calibration Discs.
  2. Consumables:
    • 1x 85% Glycerin Solution Bottle (for hydraulic calibration).
    • 10x Disposable Dust Filters.
  3. Documentation:
    • Multilingual Quick-Start Guide (printed + digital).
    • Compliance Certificates for IEC/UL Standards.
  4. Safety Gear:
    • 2x Safety Goggles (ANSI Z87.1 rated).
    • 1x Emergency Pressure Release Key.


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Photovoltaic module backplane peeling strength testing machine
Photovoltaic module backplane peeling strength testing machine Introduction: The Photovoltaic Module Backplane Peeling Strength Testing Machine is a specialized device designed to evaluate the peeling strength...
Upper Leather Flexing Tester
Upper Leather Flexing Tester Main uses: VAMP VAMP leather extension testing machine with a certain frequency of zigzag test, observe the change of the surface of the test piec...
Hydraulic oil purification and filtration tester
Hydraulic oil purification and filtration tester Meet the standard: ISO 16889 ISO 4406 ASTM D7619 ISO 11500 Product Introduction: Hydraulic oil purification and filtration testers are esse...
Foam Indentation Fatigue Testing Machine
Foam Indentation Fatigue Testing Machine Purpose: This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane foam sample can be tested accordin...
Safety Helmets Impact and Penetration Resistance Tester/   safety helmet impact test equipment  /   Helmet impact and penetration tester
Safety Helmets Impact and Penetration Resistance Tester/ safety helmet impact test equipment / Helmet impact and penetration tester Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact...
All supplier products

Same products

pH-2398  pH/EC/ORP/Temperature  multi-parameter Water Quality Tester
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester Seller: Kelilong Electron Co.,Ltd Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent...
ORP-2026S  Waterproof Soil ORP and Temperature Meter
ORP-2026S Waterproof Soil ORP and Temperature Meter Seller: Kelilong Electron Co.,Ltd 范围 ORP -999~999mV Temp 0~50℃ 分辨率 ORP 1mV...
TDS-2616  Waterproof EC/TDS/Temperature Meter
TDS-2616 Waterproof EC/TDS/Temperature Meter Seller: Kelilong Electron Co.,Ltd Range EC ~19.9mS TDS Temp 0~50℃ R...
EC-98330 CF ECOstick - Nutrient Tester
EC-98330 CF ECOstick - Nutrient Tester Seller: Kelilong Electron Co.,Ltd Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el...
PH-808 Waterproof Soil PH Meter
PH-808 Waterproof Soil PH Meter Seller: Kelilong Electron Co.,Ltd Model PH-808 Range PH ~14.00PH Temp 0~50℃ ...