.

Carpet Pilling and Fuzzing Tester

Relevant Standards

GB/T21196 - 2007, GB/T4802.2,

GB/T13775,

FZ/T20020,

ASTM D4970,

ISO12945 - 2,

ASTM D4966,

ASTM D3886,

ISO12947,

JIS L1096,

IWS TM196,

TM112, M&S

Application Scope

It is used for performance tests of abrasion resistance, wear - and - tear, and appearance changes (pilling) of textiles and membrane materials.

Instrument Description

This instrument is used to simulate the pilling and fuzzing phenomena that occur during the normal use of carpets.

The instrument contains a roller covered with nylon, which can generate a frictional motion with a set number of cycles on the surface fibers of the sample. Then, observe the appearance changes of the sample.

Working Principle

The circular textile sample rubs against the standard abrasive along the motion trajectory of the Lissajous curve under a certain pressure, resulting in sample damage. The abrasion - resistant performance of the textile is represented by the number of abrasion cycles until the sample is damaged.

Consumables

PFZ:VEL —— 5m Nylon Roller


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Automatic Edging Burling Machine
Automatic Edging Burling Machine lt is applicable to inspect cloth in many industries such asgarment, bags and suitcases, shoes and hats, quilting,home textiles,curtains etc., but ...
Scratch tester
Scratch tester Product Introduction: With the continuous expansion of the use of plastic molding products, from the point of view of the surface appearance of mo...
Shoelace anti-siphon tester
Shoelace anti-siphon tester Product Introduction: Shoelace anti-siphon tester is suitable for all kinds of waterproof leather, leather, mesh, waterproof shoelace, ribbon wate...
Sharp Tip Tester
Sharp Tip Tester Meet the standard: ASTM F963 EN 71-1 ISO 8124-1 Product Introduction: Certain points on toys, if excessively sharp, can cause injuries. Safe...
Helmet Anti - detachment Testing Machine
Helmet Anti - detachment Testing Machine Purpose Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain heigh...
All supplier products

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 Seller: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
Surface Performance Tester STD-FB4 - A Seller: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A Seller: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH Seller: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S Seller: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...