American European bending tester
Test Purpose：
To determine if metal wires in children's products bend or break under stress, creating sharp edges or points that pose choking or injury hazards.
Compliance Standards：
- 16 CFR CPS USA: Child Product Safety Certification
- ASTM F963: Standard Consumer Safety Specification for Toy Products
- EN 71: European Toy Safety Directive
Test Methodology：
| Test Parameter | Specification |
|---|---|
| Deformation Test | Apply 3N axial force for 5 minutes |
| Bend Test | Flex the wire at 90° angle with 5mm radius mandrel |
| Edge Evaluation | Check for sharp edges using ISO 4671-1:2017 gauge |
Product advantages:
Ensures Child Safety: Directly tests for potential hazards from metal wires, significantly reducing the risk of cuts, punctures, or ingestion of broken pieces.
Dual Market Compliance: Designed to perform tests required by both US (ASTM, 16 CFR) and European (EN 71) standards, simplifying testing for manufacturers targeting both markets.
Objective and Quantifiable Results: Provides measurable outcomes (deformation percentage, breakage force) and a pass/fail assessment for sharp edges based on standardized methods.
Supports Design and Quality Control: Valuable for validating material choices, evaluating product design, and performing quality checks during manufacturing.
Reduces Risk of Recalls: Helps prevent costly and damaging product recalls by ensuring compliance with safety regulations before products are shipped.
Acceptance Criteria：
- No permanent deformation exceeding 15% of original length
- No sharp edges exceeding 0.5mm radius
- Maximum allowable breakage force ≥ 2N
Send product request
Other supplier products
 |
Anti-crack fatigue tester | How it works: By simulating the cyclic loading stress that the material may be subjected to during actual use, such as tensile, compression, bendi... |
 |
Protective clothing flame spread tester ISO 15025 | Applications: The instrument is applied for thetesting of fire hazard using com-bustible materials, like fabric orother similar functional materia... |
 |
Nonwovens Synthetic Blood Penetration Tester | QinsuSynthetic Blood Penetration Resistance Tester is developed for ranking the synthetic blood penetration resistance performance of medical face ... |
 |
Creep testing machine with full incision/ Full-Notch Creep Tester / FNCT Creep Testing Machine | Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable... |
 |
Geotextile Opening Size Tester (Dry Sieving) ISO 8124-1 ISO 8124-4 | Standards: ASTM 4751.GB/T 14799.JTG E50.T1144 SL/T 23.ISO 8124-1.ISO 8124-4 Applications: Geotextile Opening Size Tester (Dry Sieving), to deter... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
