Wire Torsion Tester
Applicable standards:
GB/T 239.1-2012 "Metal materials wire Part I unidirectional torsion test method"
GB/T 239.2-2012 "Metal materials wire Part II Bidirectional torsion test method"
ISO 7800:2003 "Test method for unidirectional torsion of metal wires"
ISO 9649:1990 Test method for bidirectional torsion of metal wires
Product Advantages:
Evaluates Torsional Ductility: Directly measures the wire's ability to withstand twisting before fracture.
Standardized Testing: Enables testing according to widely recognized national and international standards.
Reveals Defects: Torsional stress can highlight material imperfections or inconsistencies not apparent under other tests.
Supports Quality Control: Provides a reliable method for ensuring consistent wire quality.
Versatile: Can perform both unidirectional and bidirectional torsion tests.
Controlled Parameters: Allows for precise control of twisting speed and specimen length for repeatable results.
Test principle:
Unidirectional torsion: The sample rotates 360 degrees evenly around its axis in one direction as a single torsion to the specified number of times or the sample breaks.
Two-way torsion: the sample rotates 360 degrees evenly around its axis in one direction as a torsion to the specified number of times, and then rotates the same number of times in the opposite direction or the sample breaks.
Main parameters:
1, clamping metal wire diameter range: 3.0≤d（D）<5.0
2, the space between the two fixtures: 500mm
3. Clamp range: 3.0-5.0mm
4, twisting speed: 30, 60r/min
5. Power supply: AC220V 50Hz
6, Noise: <70 dB（A）
Send product request
Other supplier products
 |
Helmets Vertical SpacingInfrared - positioning Tester/ safety helmet vertical spacing tester / helmet fit measurement device | Purpose This measuring instrument is used to measure the vertical spacing and wearing height of safety helmets. Applicable Standard GB/T 2812-... |
 |
Negative pressure tester for medical syringes | Negative pressure tester for medical syringes - Other test instrument - standard Standards: YY0053-2008, GB 15810-2019 single-use sterile syrin... |
 |
G631A electric shoe stripping testing machine | Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the principle is to load the... |
 |
Hand cranking Textile Crockmeter ISO 105 D02 X12 AATCC 8/165 | Introduction Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the fab... |
 |
ICI Mace Snag Test machine | Standards: ASTM D3939 Standard Test Method for Snagging Resistance of Fabrics (Mace Test Method) GB/T 11047 Textiles-Determination of fabrics sn... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
