FPC Flex Durability Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The FPC Flex Durability Tester is designed to evaluate the bending durability and fatigue life of flexible printed circuits (FPC), flexible flat cables (FFC), and similar flexible electronic components. The tester simulates repeated bending at controlled angles, speeds, and strokes to assess mechanical reliability and electrical continuity under cyclic flexing conditions. It is widely used in product development, quality control, and reliability testing of flexible electronic interconnects.
Application
(1) Flex durability testing of FPC (Flexible Printed Circuits) used in mobile s, tablets, laptops, and wearable devices.
(2) Fatigue life evaluation of FFC cables used in displays, cameras, and hinge structures.
(3) Reliability testing of flexible interconnects in automotive electronics and dashboards.
(4) Bending endurance testing of flexible circuits used in medical devices and precision instruments.
(5) R&D validation of new flexible substrate materials and circuit designs.
(6) Quality control testing during mass production of flexible electronic components.
(7) Electrical continuity monitoring during cyclic bending until failure.
Standards
(1) ASTM F392 – Standard Test Method for Flex Durability of Flexible Circuits.
Features
(1) Stepper motor drive ensures high positioning accuracy, low noise, and long-term stable operation.
(2) Program-controlled automatic origin reset, eliminating manual fixture repositioning.
(3) Touch screen controller for intuitive parameter setting and program input.
(4) Test angle, speed, test cycles, and motor return-to-origin can be digitally set via touch screen.
(5) Automatic counting with preset test cycles and auto-stop upon reaching the set value.
(6) Electrical conduction detection function with automatic stop when circuit disconnection occurs.
(7) Automatic stop when the specimen bends to the broken line and loses conductivity.
(8) Upper and lower moving fixtures simulate realistic flexing conditions.
Technical Parameters
| Parameter | Specification |
|---|---|
| Test station | 1 |
| Test angle | 10–180° (touch screen digital setting) |
| Test speed | 10–120 times/min (touch screen digital setting) |
| Drive motor | Stepper motor (standard), Servo motor optional |
| Test stroke | 15–100 mm (manual adjustable) |
| Maximum fixture width | 80 mm |
| Fixture configuration | Upper moving fixture + lower moving fixture |
| Counter range | 0–999,999 cycles (preset, auto-stop at break) |
| Test functions | Angle, speed, cycles setting; continuity detection; auto stop; auto origin finding |
| Machine size (L×W×H) | 450 × 380 × 700 mm |
| Machine weight | Approx. 45 kg |
| Power supply | AC 220V, 50 Hz |
Test Procedure
(1) Fix the FPC or flexible cable specimen securely in the upper and lower fixtures.
(2) Set the bending angle, test speed, stroke, and target number of cycles on the touch screen.
(3) Enable the electrical continuity detection function if required.
(4) Start the test; the specimen is repeatedly bent according to the preset parameters.
(5) The system automatically counts cycles and monitors electrical continuity.
(6) The test stops automatically when the preset number is reached or when electrical disconnection occurs.
(7) Inspect the specimen and record bending life and failure mode.
Maintenance Information
(1) Regularly inspect fixtures to ensure secure clamping and accurate alignment.
(2) Keep the touch screen and control system clean and free from dust.
(3) Periodically check motor operation and mechanical transmission components.
(4) Verify electrical continuity detection function before critical tests.
(5) Store the equipment in a dry, vibration-free laboratory environment.
Send product request
Other supplier products
 |
Industrial automotive screw inspection machine supplier | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system aligns with or supports adherence to relevant international and indus... |
 |
ASTM E84 Steiner Tunnel Test Furnace | Flame Spread & Smoke Density Fire Test Equipment Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Parameters ParameterSpecification Test Method ASTM E84 / NFPA 25... |
 |
High Temperature Creep Testing Equipment ISO 204 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Application (1) Tensile creep and endurance testing of metallic materials at... |
 |
Combustion Flue Gas Treatment System，ISO 14001 combustion flue gas cleaning and treatment system | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Combustion Flue Gas Treatment System is designed to purify flue gases generated during ... |
 |
Cookware scratch resistance testing machine for non-stick coating | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) BS7069 Annex A.3 – Scratch resistance test method for non-stick cookwa... |
Same products
 |
KL‑016A Benchtop High‑precision pH Meter | Seller: Kelilong Electron Co.Ltd | Product Description: Large‑screen display with high resolution and precision for con... |
 |
Large Naïve VHH Library | Seller: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester | Seller: Kelilong Electron Co.,Ltd | Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent... |
 |
ORP-2026S Waterproof Soil ORP and Temperature Meter | Seller: Kelilong Electron Co.,Ltd | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
TDS-2616 Waterproof EC/TDS/Temperature Meter | Seller: Kelilong Electron Co.,Ltd | Range EC ～19.9mS TDS Temp 0～50℃ R... |
