STD SOLARBOX 1500 - 3000

• 

Introduction

Radiant energy in the STD SOLARBOX is provided by a single superior air-cooled Xenon Lamp generating an irradiance level up to two times the sun one. Irradiance is the rate at which light energy falls onto the samples. A weathering tester must control irradiance if it is to achieve accurate and reproducible test results. STD SOLARBOX offers constant measurement and control of rradiance during every test, compensating for lamp and UV filter ageing via a closed loop irradiance narrow-band sensor control system.

Irradiation uniformity is guaranteed by a parabolic reflector chamber with the Xenon Lamp in the focus, the best design for a reliable flat-bed xenon exposure system and very good agreement with rotating drum xenon exposures.

Standards:

ADHESIVES: ASTM D904; ASTM C1442; ASTM

C1501; RILEM DBS.

AUTOMOTIVE: SAE J2527; SAE J2412.

COATINGS: QUALICOAT; ISO 2135; ISO 11341;ASTM D3451; ASTM D3794; ASTM D6577; ASTMD6695; GB 1865; JIS K 5600-7-7; MPI: #113; MS133: Part F14.

DENTISTRY: ISO 4049:2000; ISO 7491:2000.

GENERAL: IEC 68-2-9; ISO 4892-1; ASTM G151;ASTM G155.

GEOTEXTILES: ASTM D4355.

INTRA-OCULAR LENSES: ISO 11979-5:2006

INKS/PAPER: ISO 11798; ISO 12040; ISO 18909;ASTM D3424; ASTM D4303; ASTM D5010; ASTM D6901; ASTM F2366.

PACKAGING: ASTM D6551.

PHARMACEUTICAL: ICH Guideline Q1B.

PLASTICS: ISO 4892-2; JIS K 7350-2; DIN EN 513;ASTM D1248; ASTM D2565; ASTM D4101; ASTM D4459; ASTM D5071; ASTM D6662; UL 1581.

ROOFING: ASTM D4434; ASTM D4637; ASTM D4798; ASTM D4811; ASTM D5019; ASTM D6083.

RUBBER: ISO 3865; ISO 4665.

SEALANTS: ASTM C1442; ASTM C1501.

TEXTILES: AATCC TM 16; AATCC TM 169; GB/T8430; IS: 2454; ISO 105-B02.

Specification

Other supplier products

	Reciprocating Friction and Wear Evaluation Apparatus	Applicable Standards ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to...
	Conditioning Chamber	Features and Benefits 1.The compressor, condenser and other power components are separated from theworkroom, reducing the equipment footprint. 2....
	Safety Helmet High Temperature Pre-Treatment Chamber	The safety helmet high-temperature pre-treatment chamber is manufactured according to the GB/T2812-2019 standard for safety helmets and is primaril...
	Liquid Spontaneous ignition point tester	Product Description complies with GB/T 21860-2008 “Test Method for Autoignition Temperature of Liquid Chemicals” and ASTM E “Tes...
	Residual Ethylene Oxide Gas Chromatography System	The Residual Ethylene Oxide Gas Chromatography System is a professional analytical instrument designed for the detection and quantification of resi...

Same products

	Gas Oxidizing Property Tester	Seller: Standard International Group (HK) Limited	Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
	Battery Powder Compaction Density Measurement System	Seller: Standard International Group (HK) Limited	The Battery Powder Compaction Density Measurement System is a precision testing system designed...
	Battery Powder resistance tester	Seller: Standard International Group (HK) Limited	The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
	KES-SESRU surface roughness/friction tester	Seller: Standard International Group (HK) Limited	TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...