Gas Explosion Limit Tester，UL9540A

Introduction

The explosion limit tester can realize the explosion limit measurement of combustible gas or volatile solid or liquid under high temperature environment. At the same time, it can test the maximum explosion pressure when combustible gas explodes. The explosion limit measured under high temperature and high pressure conditions has great reference value for chemical process design and risk assessment and control;

The test instrument meets the requirements of UL9540A to test the lower limit of combustion and the maximum explosion pressure of the gas released by battery thermal failure. At the same time, it can test the upper and lower concentration limits of flammable gases or vapors that burn and explode, as well as the explosion pressure, explosion index, etc. The test results can be used to characterize the sample explosion risk, explosion severity, and evaluate the degree of explosion damage, etc.

Standard

UL9540A

Function and technical index

1.Use 20L stainless steel explosiveball;

2.The use of wrapped heaters can realize rapid temperature control and adjustment in the explosion field, and the heating rate is morestable.

3.Equipped with imported high-precision pressure sensors, the mixed gas is configured by the Dalton partial pressure method to accurately control the gasconcentration;

4.Adopt computer automatic high-voltage automatic electric spark ignitionmethod;

5.Equipped with OMEGA thermocouple imported from the United States, with a temperature accuracy of±0.5℃

6.Equippedwithavacuumpumpforvacuumingthecabin,andequippedwithanimportedbrand vacuumgauge.

7.Equippedwithimportedsolenoidvalveforgasdistributiontorealizeautomaticgasdistribution and automaticmeasurement.

8.The final combustion and explosion state can be judged by pressurechanges;

9.Equipped with magnetic stirring function, which can realize the full mixing of gas in thecabin.

10.Usingspecialpressuresensorforexplosion,theworkingtemperatureishigh,stable,andthe accuracy isbetter;

11.Computer automatic control system. Implement output temperature curve, pressure curve, and automatically calculate the lower limit of gas combustion, maximum explosion pressure, explosion index and other testparameters.

12. automatic control, automatic vacuum, automatic gas distribution, automatic stirring; 1.13. stainless steel container pressure: 2.0Mpa, burst valve pressure: 2.0Mpa;

13. Explosion pressure sensor: 2.0Mpa, linearity is ±1.0%FS

14.Pressure recording sampling rate: sampling frequency10.0kHz;

15.High-voltage spark ignition energy: 15kV, 30mA, ignition electrode gap:6.4mm.

Technical parameter

1)Working environment: (-5～45)℃,<95%RH

2)Test object: gas or vaporizable solid,liquid

3)The temperature control range of the cabinet:(-10～250)℃

4)Temperature control accuracy:±1℃

5)Measuring range of sample temperature:(-50～300)℃

6)Resolution of sample temperature measurement:0.1℃

7)Accuracy of sample temperature measurement:±0.5℃

8)Pressure measurement range:(0～110)kPa

9)Pressure measurement accuracy:±0.1%FS

10)Work can reach vacuum degree:≤1.33kPa

11)Leakage:≤0.1kPa/min

12)Ignition spark gap:6.4mm

13)Ignition arc voltage/current:15kV/30mA

14)Ignition duration:(0～1)s

20L stainless steelcontainer

Other supplier products

	Photovoltaic Module Insulation Resistance chamber	Application The tester is applicable in various PV module testing scenarios: Crystalline silicon PV module insulation performance evaluation Thi...
	Protective Clothing Liquid Static Pressure Tester	Standards GB24540-2009，LFY-252 Instrument use The acid-proof clothing material anti-seepage acid static acid pressure tester is used to measure ...
	Safety Helmet Roll-off Testing Equipment	The safety helmet retention test equipment is a device used to evaluate the stability of a helmet's fit when subjected to impact. By simulating the...
	Wyzenbeek or Oscillatory Abrasion Tester，custom wyzenbeek/Oscillatory Abrasion Tester	Wyzenbeek wear resistance tester, also known as Oscillatory wear resistance tester, is used to test the wear resistance of fabrics against standard...
	Touch Haptics Test System，Automotive interior material tactile perception quality testing program system	The Touch Haptics Test System is a precision laboratory instrument designed to evaluate the tactile perception and haptic quality of automotive int...

All supplier products

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...