Gas Explosion Limit Tester，UL9540A

Introduction

The explosion limit tester can realize the explosion limit measurement of combustible gas or volatile solid or liquid under high temperature environment. At the same time, it can test the maximum explosion pressure when combustible gas explodes. The explosion limit measured under high temperature and high pressure conditions has great reference value for chemical process design and risk assessment and control;

The test instrument meets the requirements of UL9540A to test the lower limit of combustion and the maximum explosion pressure of the gas released by battery thermal failure. At the same time, it can test the upper and lower concentration limits of flammable gases or vapors that burn and explode, as well as the explosion pressure, explosion index, etc. The test results can be used to characterize the sample explosion risk, explosion severity, and evaluate the degree of explosion damage, etc.

Standard

UL9540A

Function and technical index

1.Use 20L stainless steel explosiveball;

2.The use of wrapped heaters can realize rapid temperature control and adjustment in the explosion field, and the heating rate is morestable.

3.Equipped with imported high-precision pressure sensors, the mixed gas is configured by the Dalton partial pressure method to accurately control the gasconcentration;

4.Adopt computer automatic high-voltage automatic electric spark ignitionmethod;

5.Equipped with OMEGA thermocouple imported from the United States, with a temperature accuracy of±0.5℃

6.Equippedwithavacuumpumpforvacuumingthecabin,andequippedwithanimportedbrand vacuumgauge.

7.Equippedwithimportedsolenoidvalveforgasdistributiontorealizeautomaticgasdistribution and automaticmeasurement.

8.The final combustion and explosion state can be judged by pressurechanges;

9.Equipped with magnetic stirring function, which can realize the full mixing of gas in thecabin.

10.Usingspecialpressuresensorforexplosion,theworkingtemperatureishigh,stable,andthe accuracy isbetter;

11.Computer automatic control system. Implement output temperature curve, pressure curve, and automatically calculate the lower limit of gas combustion, maximum explosion pressure, explosion index and other testparameters.

12. automatic control, automatic vacuum, automatic gas distribution, automatic stirring; 1.13. stainless steel container pressure: 2.0Mpa, burst valve pressure: 2.0Mpa;

13. Explosion pressure sensor: 2.0Mpa, linearity is ±1.0%FS

14.Pressure recording sampling rate: sampling frequency10.0kHz;

15.High-voltage spark ignition energy: 15kV, 30mA, ignition electrode gap:6.4mm.

Technical parameter

1)Working environment: (-5～45)℃,<95%RH

2)Test object: gas or vaporizable solid,liquid

3)The temperature control range of the cabinet:(-10～250)℃

4)Temperature control accuracy:±1℃

5)Measuring range of sample temperature:(-50～300)℃

6)Resolution of sample temperature measurement:0.1℃

7)Accuracy of sample temperature measurement:±0.5℃

8)Pressure measurement range:(0～110)kPa

9)Pressure measurement accuracy:±0.1%FS

10)Work can reach vacuum degree:≤1.33kPa

11)Leakage:≤0.1kPa/min

12)Ignition spark gap:6.4mm

13)Ignition arc voltage/current:15kV/30mA

14)Ignition duration:(0～1)s

20L stainless steelcontainer

Другие товары поставщика

	Dry fallen wadding tester G275	G275 Dry fallen wadding tester, The tester is used to evaluate the fallen wadding test of non-woven fabrics under dry conditions, and is mainly app...
	Drawer Slide Endurance Testing Equipment	Product Introduction Drawer slides are fundamental components in furniture, cabinetry, and various storage solutions, providing smooth and reliabl...
	Plastic Friction and Wear Tester	Product Description: Plastic sliding friction wear tester consists of two main parts: the host machine and intelligent control system, which can b...
	Masks Flame Retardant Tester丨Masks Flame Retardant Testing mechine	Introduction The flame-retardant tester of medical mask is used to test the flame-retardant performance of the mask when it is accidentally contac...
	Drying Rate Tester丨Drying Rate Chamber	Product Introduction The Drying Rate Tester is designed according to AATCC201 standard requirements. Equipped with high-precision temperature and ...

Все товары поставщика

Похожие товары

	Test for Flammability of Materials ,AS1530.2,Fire reaction test apparatus	Продавец: Standard International Group (HK) Limited	Introduction Thistester is developed base on thestandard AS1530.2. test for flammability of mate...
	Building Material Radiant Panel Test Machine,AS/NZS 1530.3	Продавец: Standard International Group (HK) Limited	Products This machine is designed according to AS/NZS 1530.3; Thedeviceviaagasradiantplatetohea...
	Radiant Panel Flame Spread Apparatus，fire spread test machine	Продавец: Standard International Group (HK) Limited	Description ASTM E162 is one most widely used test standard to evaluate the propagation properti...
	Single-Flame Source Tester， ISO11925-2，DIN 53438; DIN4102-1	Продавец: Standard International Group (HK) Limited	Introduction This instrument is designed according to ISO11925-2. it is used to test building ma...
	Density of Smoke from the Burning or Decomposition of Plastics，ASTM D2843 Smoke Density Test	Продавец: Standard International Group (HK) Limited	Introduction In a fire, people are often smoke suffocated or unable to escape because of the inv...