Shoe stripping tester
Shoe stripping tester - Other test instrument - standard
Product Information:
Main uses:
The shoe stripping tester is mainly used to measure the bonding strength between the upper and the sole or other shoe components. By simulating the peeling forces that may be encountered in actual wearing, the adhesive parts of the shoes are precisely tested to ensure the quality and durability of the shoes. The equipment is widely used in all aspects of footwear production, including raw material screening, production process monitoring and finished product quality testing. The use of the tester can find and solve the problems in the production process in time, improve product quality and consumer satisfaction.
Meet the standard:
GB/T 3903.3 -- 2011
QB/T 4329-2012
Technical parameters:
Maximum stripping force: Indicates the maximum force that the tester can apply, usually 1000N or other specific values, to ensure that the tester can meet the test needs of different shoes.
Peel edge width: the width of the peel edge has an impact on the test results, usually 20±0.2mm or 10±0.1mm （there are also 30±0.1mm and 20±0.05mm and other specifications）， the specific width can be set according to the test requirements and standards.
Peeling knife edge down speed: indicates the moving speed of the peeling knife edge in the test process, usually 20±2mm/min, and the rising and falling speed is adjustable to ensure the stability and accuracy of the test process.
Send product request
Other supplier products
 |
Falling ball impact testing machine | Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other materials and coatings. Perf... |
 |
Diesel Water Ash Sulfur Mixing Tester | Meet the standard: ASTM D6304 ASTM D1744 ASTM D95 ASTM D482 ASTM D2622 ASTM D5453 ASTM D1266 Product Introduction: Analysis of water, ash, ... |
 |
Fire stability tester for paper gypsum board | Fire stability tester for paper gypsum board - Other test instrument - standard Product Information: Technical parameters: 1, combustion tempera... |
 |
Photovoltaic module outdoor exposure test system | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61730: Photovoltaic (PV) Module Safe... |
 |
Creep testing machine with full incision/ Full-Notch Creep Tester / FNCT Creep Testing Machine | Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
