Schopper folding machine for paper
Product Information:
Use and Scope of application:
1, the instrument is suitable for tensile strength greater than 1.33kn/m, thickness less than 0.25mm paper folding determination.
2, the instrument structure parameters and technical performance are in line with GB/T457-2008 "Paper folding resistance determination method" and other relevant standards.
Technical parameters:
1, the maximum measurement thickness :0.25mm
2, folded film thickness :0.5±0.05mm
3, sample load: initial tension :7.55±0.10N Maximum tension :9.81±0.10N
4, reciprocating folding rate :110±10 times /min
5, folding roller diameter :6mm
6, folding roller and folding roller spacing :0.30mm
7, folding roller spacing :0.5mm
8, the same group chuck distance :90±0.5mm
9, counter counting range :0-9999 times
10, power supply :220V±10%50Hz
Send product request
Other supplier products
 |
Fabric Downproof Property Tester(Friction method) BS EN 12132-1 GB/T 12705.1 | Standards GB/T 12705.1-Textile - Methods of testing the down-proof properties of fabrics - GB/T14272-Down Garment requirement BS EN 12132-1 Feathe... |
 |
KES - NDG5 Puncture Strength Tester | Compliance Standards ASTM D638 (Plastics Tensile Properties) ISO 13934-1 (Textile Tensile Strength) SAE J2749 (Automotive Composite Testing) JI... |
 |
KES - FB2 - S Bending Tester | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rigid Plastics) SAE J2748 (Automotive Composite Flex... |
 |
Battery impact tester | Product introduction The test sample cell is placed on a flat surface with a 15.8±0.2mm（5/8 in） diameter rod placed in a cross position ... |
 |
Paper thickness tester | Paper thickness tester - Other test instrument - standard Product Introduction: Paper thickness tester is suitable for measuring the thickness of... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
