G678W-L cold resistance testing machine for shoes
Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other test requirements under various low temperature environment to understand the ability of various materials or finished shoes to adapt to low temperature climate or cold terrain area, this instrument is made of rust SUS steel, can be installed with a variety of different test fixtures. In order to meet the different standards of various tests.
Meet the standard:
ASTM D17900, EN ISO 20344, HG/T 2411, HG/T 2871, DIN 53351, SATR TM55, Adidas GE-24, GE-57, GB/T 20991-2007 and other standards
Main parameters of cold box:
1, balanced temperature regulator humidity control system
2, temperature range: -25℃ —— +150℃
3, temperature fluctuation: ≤±0.5℃
4, temperature uniformity: ≤2℃
5, temperature accuracy: ±0.2℃
6, heating time: +25℃→+85℃ room temperature to 85℃ about 30 minutes no load
7, cooling time: +25℃→-40℃ room temperature to -40℃ about 50 minutes no load
8. Lead hole: φ50mm 1 （with 1 rubber plug）
9, heating rate: 3 —— 5℃/min（average）， cooling rate: 0.7 —— 1℃/min（average）
Shoe thermal test fixture set:
A: Cold medium: composed of 5mm diameter and 4kg total mass of stainless steel balls
B: Test copper plate: （350±5）*（150±1）*（5±0.1）mm
C: thermometer: accuracy is ±0.5 ° C
The fixture group should be configured according to actual test requirements or other standard requirements.
Send product request
Other supplier products
 |
Acceleration Impact Performance Testing Machine for Safety Helmets | Standards: GB2812 - 2019 Applications: This instrument is suitable for impact - collision tests of helmets. It is a testing instrument use... |
 |
Methyl Polysilazane Precursor Ceramic Resin STD-8808 | Introduction STD8808 is a side-methyl 100% solid-content polysilazane resin that rapidly cures via heating. The cured resin exhibits excellent adh... |
 |
Pilling assessment viewer | Universal pilling pilling viewer/Pilling Pilling Rating tester By comparing the sample to the standard card under the specified light source to obt... |
 |
Multiple Times Pass Test Bench | Multiple Times Pass Test Bench - Filter material testing instruments price and quotation - standard Standards: ISO16889:2008 Industrial trucks ... |
 |
Dry microbial penetration tester | Standards: ISO 22612 YY/T 0506.5 Applications: Dry microbial penetration resistance tester DMPRT is to assess the penetration resistance t... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
