Hydrostatic Head Test Machine
Standards:
AATCC 127 Water Resistance: Hydrostatic Pressure Test ASTM F1670 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood ASTM 903 Standard Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids BS 3321 Method for Measurement of the Equivalent Pore Size of Fabrics (Bubble Pressure Test) EDANA 120.2-02 Determination of Impermeability BS 3424-26 Testing Coated Fabrics - Method for Determination of Resistance to Water Penetration and Surface Wetting GB/T 4744 Textiles -Testing and Evaluation of Water Resistance - Hydrostatic Pressure Method BS EN 20811 Textiles - Determination of Resistance to Water Penetration - Hydrostatic Pressure Test ISO 811 Textile fabrics - Determination of resistance to water penetration - Hydrostatic pressure test ISO 1420 Rubber or Coated Fabrics-Determination of Resistance to Penetration by Water FZ/T 01004 Coated Fabrics-Determination of Resistance to Penetration by Water YY/T 0700 Clothing for Protection against Liquid Chemicals - Determination of the Resistance of Protective Clothing Materials to Penetration by Liquids under Pressure JIS L1092 Testing Methods for Water Resistance of Textiles – Method A (low pressure)/Method B (high pressure)
Applications:
The hydrostatic head tester can be used for waterproof moisture permeability testing of material that high density fabrics, laminated fabrics, coated fabrics and the like, such as canvas, felt cloth, tarpaulin, airtight fabric, outdoor sportswear material, umbrella test, waterproof fabric testing, etc .;
Product Information:
The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exude water droplets side when the water pressure continuously raised in a standard atmospheric environment, which is the hydrostatic pressure value of the material. It can quickly and accurately test out the encountered resistance when water through the material, to assess the material waterproof and moisture permeability.
Application
The hydrostatic head tester can be used for waterproof moisture permeability testing of material that high density fabrics, laminated fabrics, coated fabrics and the like, such as canvas, felt cloth, tarpaulin, airtight fabric, outdoor sportswear material, umbrella test, waterproof fabric testing, etc .; it can also be used for testing for the medical protective clothing of the body fluid permeability and blood permeability test, chemical protective clothing chemical liquid permeability test; breathable waterproof non-woven / non-woven fabric, permeability test of filter fabric; it can also be applied to water resistance test for paper and paperboard.
Feature
The pneumatic chuck with pressure regulating function, can provide superior clamping force, even under high pressure test condition, there will not occur leakage failure lead to test failure; at the same time ,it can meet the long-term test of the seal; chuck control has two ways to choose, mechanical button control and touch screen control.
LED observation light with high brightness, good visual in all directions, to ensure that the observation conditions is facilitate to observe and confirm the three drops of water test end point.
7-inch color screen, capacitive touch screen, multi-point touch operating system, easy to control, multi-language display, switch between Chinese – English language. System with built-in standard, select the corresponding standard number to start the corresponding standard requirements of the dynamic and static test; also includes dynamic and static custom test mode.
Accessories
| Product number | Product details |
| 1080101 | 100cm2fixture set |
| 1080102 | 19.63cm2fixture set |
| 1080103 | 26cm2fixture set |
| 1080104 | 28cm2fixture set |
| 1080301 | silent air compressor |
Send product request
Other supplier products
 |
In situ expansion analysis system | Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 12417-1: Mechanical Testing of Metals &ndas... |
 |
Photovoltaic module outdoor exposure test system | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61730: Photovoltaic (PV) Module Safe... |
 |
Pipe drop hammer impact testing machine | Pipe drop hammer impact testing machine - Other test instrument - standard Product Information: Product Introduction: 1. Name: drop hammer impac... |
 |
Cleanliness Analysis System | Production： The cleanliness analysis system fully complies with the requirements of standards such as VDA19.1 - 2015. ISO16232. ISO4406. ISO4407. ... |
 |
Fabric Fiber Shedding Degree Tester (Friction) | Instrument Testing Principle Lay the specimen flat and fix it on the holder. Make the wet abrasive attached to the friction head perform reciproca... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Seller: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
