High - speed Pellet Impact Testing Machine for Helmet Goggles
Standards:
SNELL SA/K2010, EN 166, EN 168, ANSI Z87.1, MIL - PRF - 32432
Applications:
To test the impact - resistance performance of glasses, goggles and face shields at a certain speed.
Product Information:
Technical Parameters
1. High - speed speed - measuring system, adopting high - precision laser speed - measuring and sensing device. 2. Equipped with safety warning lights. When the equipment door is not properly closed, the equipment cannot enter the testing state (dual - limit switches are installed at the position of the door handle). 3. Touch - screen control. The speed units that the equipment can display include ft/s, m/s, km/s. 4. Head mold material: Silicone, simulating the human head shape (with ears, nose and mouth). 5. Air source requirements for the air compressor: Flow rate ≥ 500l/min, air pressure ≥ 0.65Apa. 6. Power supply: AC 220V 50HZ. 7. The control panel is equipped with an emergency stop device for higher safety; a digital LCD display shows the speed (m/s) of the ejected object.
Send product request
Other supplier products
 |
Acceleration Impact Performance Testing Machine for Safety Helmets | Standards: GB2812 - 2019 Applications: This instrument is suitable for impact - collision tests of helmets. It is a testing instrument use... |
 |
Glove Cut Resistance Tester | Product Introduction: The machine is used to test the cutting resistance of gloves. Under the specified load, the blade cuts the sample to measure... |
 |
UV Viewing Cabinet | Scope of application: Coatings and paints: Used to test phosphors in various substances such as plastics, paints and coatings Aluminum foil: Used... |
 |
EN sole zigzag testing machine | Product Introduction: The EN sole bending tester is used for 90 degree bending test of the sole of rubber, EVA and other zigzag shoes to detect it... |
 |
Testing Equipment for Wearing Stability of Safety Helmets | Testing Equipment for Wearing Stability of Safety Helmets - Other test instrument - standard Standards: GB 811 - 2022, GB 24429 - 2009, GB/T 28... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
