Dual-axis Gun drilling Machine Tool ZK2108X2B/500

• 

Overview:

Processing Method: outside chip removing; gun drill

Hole Diameter(mm): Φ1.5~Φ8

Hole Depth(mm): 500 (Draw Ratio≤100)

NC System: GSK980TDC / FANUC OI Mate TC

Drill Pipe: high speed mechanical spindle; frequency control; simultaneously rotating and

feeding

Workpiece: constant speed rotation

Guide Sleeve: axial restraint

Workpiece Clamping: based on the top of tail and cone disc of guide sleeve, to accurately

orientate workpiece by chamfer of the two sides;

pneumatic stretch out and draw back to fasten the workpiece.

Parameter:

Processing Ability:

1. Number of Spindle(pcs): 2
2. Hole Diameter(mm): Φ1.5~Φ8
3. Hole Depth(mm): ≤500
4. Diameter Range of Workpiece(mm): ≤Φ50
5. Length Range of Workpiece(mm): ≤500

Processing Speed:

1. Max Rotation Speed of Drill Pipe’s Spindle (r/min): 15000
2. Workpiece Rotation Speed(r/min): 500 (fixed)
3. Feeding Speed Range(mm/min): ≤1500
4. Forward Speed(mm/min): ≤2000

Processing Accuracy:

1. Hole Skewness: ≤0.5/1000 (workpiece rotating)

≤1.0/1000(workpiece fixed)

2. Dimensional Accuracy of Drill Pipe: IT7~IT11
3. Hole Rugosity: Ra0.4~Ra1.6

Power of Machine

1. Drill Pipe Motor Power(kw): 2X1.1
2. Workpiece Rotating Power(kw): 2X1.1
3. Oil Pump Power(kw): 2X4.0
4. Feeding Power(kw): 1.8
5. Power of Oil-temp Cooling Machine(kw): 2.8

Hydraulic System

1. Max Volume of Flow(L/min): 2X20 (dual-axis)
2. Max Pressure(Mp): 16
3. Filtering Accuracy(um): 10
4. Oil Storage Capacity(L): 960

Basic Dimension & Weight

1. Dimension (mm): 4500*3000*1500(L*W*H)
2. Height between Drill Pipe Centre and Ground(mm): 1070
3. Height between Drill Pipe Centre and Guide(mm): 297.0
4. Distance between Axles(mm): 220
5. Weight of Main Engine(kg): 5000

Other supplier products

	Four-axis Gun drilling Machine Tool ZK2115X4B	Overview: Processing Method:  outside chip removing; gun drill Hole Diameter(mm):  Φ3~Φ15 Hole Depth(mm):  500; 1000; 1500 (Draw Ratio≤100) NC ...
	Dual-axis Gun drilling Machine Tool ZK2108X2B/500	Overview: Processing Method: outside chip removing; gun drill Hole Diameter(mm): Φ1.5~Φ8 Hole Depth(mm): 500 (Draw Ratio≤100) NC Sys...
	ZK2130C/1500 Single Axis Gun Drilling Machine Tool	Overview: Processing Method: outside chip removing; gun drill Hole Diameter(mm): Φ5~Φ30 Hole Depth(mm): 1500 Bench Traverse Distance(...
	Four-axis Gun drilling Machine Tool ZK2120X4A/500	Overview: Processing Method:  outside chip removing; gun drill Hole Diameter(mm):  Φ10~Φ20 Hole Depth(mm):  500 NC System:  GSK980TDC Drill Pi...
	coating gun drill	Coated tool has characteristics as high surface hardness,good abrasion performance, stable chemical properties,small friction factor and lower ther...

Same products

	The Single Workstation Electrostatic Perforating Machine	Seller: Wuhan Guan You Technology Co., Ltd.	The single workstation electrostatic perforating machineis a professional cigarette paper static ...
	YZH WHEN1510 Stationary Pedestal Rockbreaker Boom	Seller: Shandong Yirun Foundation Engineering Co., Ltd	Below is a detailed introduction to the YZH WHEN1500 fixed hydraulic demolition arm, covering its...
	YZH WHEN1410 Stationary Pedestal Rockbreaker	Seller: Shandong Yirun Foundation Engineering Co., Ltd	YZH WHEN1410 Stationary Pedestal Rockbreaker is a specialized equipment designed for secondary cr...
	JY-160S2 Standard Plastic Injection Machine	Seller: Dongguan Jieyang Machinery Co., Ltd	Straight screw ejected assembly. Two(three)-phase temperature, ejected speed, backing pressure a...
	WPC Terrace panel extrusion line	Seller: Qingdao Trusty Plastic Machinery Co.,Ltd	Wood-polymer composite (WPC), unlike wood, has higher resistance to aggressive environments and v...