TB 14-100 Wall Panel Roll Forming Machine

1). Thickness of steel coil: 0.3-0.9mm

2). Material: PPGI, GI

3). Input width: 1220mm

4). Output width: 1000mm

5). Total length (from de-coiler to output table): about 15-16M

6). Total weight: about 8T

7). Tolerance of length: 10±2mm

8). Transporting: 1×40ft Container

2. Main roll forming machine

1). Machine stand: 350H steel welding structure

2). Guide feed way: side sliding type

3). Structure: wall panel, thickness 14mm

4). Number of stations: 13 stations

5). Main shaft material: 45# steel, O.D.: 80mm, quenching and tempering treatment

6). Roller material: high grade 45# steel, quenching 58-60℃

7). Way of drive: by chain

8). Forming speed: 8 m/min

9). Main motor power: 5.5kw

10). Power supply: 380V, 50HZ or at buyer’s requirement, 3-Phase

11). Motor is under the mould, which can save space

12). Dimension (L*W*H): 8.5×1.7×1.6m

1). Material of blade and mould: Cr12MoV steel with quenched treatment 60-62℃.

2). Cutting system: adopt advanced hydraulic cutting system, automatic cut after forming no distortion, waste, high safe factor (main motor stops and then cuts).

3). Cutting type: stop machine cutting.

1). Screen display:Mitsubishi or Siemens touch screen;

2). PLC: Mitsubishi or Siemens;

3). Measure the length automatically;

4). Count the quantity automatically;

5). Length and quantity is controlled by computer, the machine will cut automatically as reaching the set length, the machine can automatic stop;

6). It is easy to adjust the error of length;

7). Meter count way: rotary encoder;

1). YUKEN system, made in China;

2). Power: 3KW;

3). Oil pump of hydraulic station: gear pump;

4). Hydraulic cylinder: 100mm;

5).Structure of cutting: size of hydraulic station 55×65×90mm;

6). 1 set of electro valve;

7). The oil pipe can not be welded type (protective of oil leak), treatment of welding spot of total machine.

De-coiler; Roll Forming Machine Unit; Hydraulic Automatic Cutting Unit; Run Out Table; PLC Control Cabinet; Electrical system; Hydraulic system.

De-coiler→ Feed with guide→ Roll forming→ Hydraulic cutting unit→ Run-out table→ PLC control system

Other supplier products

	TT 40-250 Roof Panel Roll Forming Machine	1. General parameters 1). Thickness of steel coil: 0.3-0.9mm 2). Material: PPGI, GI 3). Input width: 1220mm 4). Output width: 1000mm 5). Total len...
	Hydraulic un-coiler	Main technical parameters: Width of steel coil: Max. 1300mm Tension of uncoiling:（Max.）20KN; Uncoiling speed: （Max.）60m/min; Transverse distance:...
	Expanded Diamond hole metal mesh machine 1250mm	General description: ANBER high speed expanded mesh machine, it is high speed and CE certificated. Detailed description: Expend mesh machine is a ...
	TT 56-210 Metal Deck Roll Forming Machine	1. Main technical parameters 1).Thickness of steel coil: 0.4-1.0mm 2). Material: PPGI, GI 3). Input width: 1220mm 4). Output width: 840mm 5). Tota...
	steel coil slitting machine	Introduction of the steel sheet slitting line: Slitting line machine is not only for the steel service cutting industry, but also for the pipe i...

All supplier products

Same products

	Thrust Roller	Seller: CITIC IC LUOYANG HEAVY MACHINERY CO., LTD	CIC is a more than 30-year manufacturer and reputed supplier of thrust roller used in rotary kiln...
	HBY-30 Constant Temperature Water Curing Box (horizontal)	Seller: Zhejiang Luda Machinery Instrument Co.,Ltd	This type of water curing tank is designed and manufactured according to the maintenance requirem...
	HBY-30 Constant Temperature Water Curing Box (vertical)	Seller: Zhejiang Luda Machinery Instrument Co.,Ltd	This type of water curing tank is designed and manufactured according to the maintenance requirem...
	FSY-150 Cement Fineness Negative Pressure Sieve Analyzer (ordinary)	Seller: Zhejiang Luda Machinery Instrument Co.,Ltd	This equipment is widely used in cement fineness inspection and cement production control. It can...
	FZ-31 Boiling Box	Seller: Zhejiang Luda Machinery Instrument Co.,Ltd	This equipment is one of the commonly used equipment in cement production, construction, scientif...